MIC2210 datasheet(5/11 Pages) MICREL

5 / 11 page

Micrel, Inc.

MIC2210

November 2006

M9999-112006

Parameter

Condition

Min

Typ

Max

Units

DRV Output

Voltage Low

IDRV = 150mA

0.2

0.5

0.6

Leakage Current

IDRV = 0mA, VDRV = 5.5V, SW = 0V

–1

0.01

µA

Logic Low (DRV Shutdown)

0.6

SW Input Voltage

Logic High (DRV Enabled)

1.8

VIL < 0.6V (DRV Shutdown)

–1

0.01

µA

SW Input Current

VIH > 1.8V (DRV Enabled)

–1

0.01

µA

Notes:

1. Exceeding the absolute maximum rating may damage the device.

2. The device is not guaranteed to function outside its operating rating.

3. The maximum allowable power dissipation of any TA (ambient temperature) is (PD(max) = TJ(max) – TA) / θJA. Exceeding the maximum allowable power

dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.

4. Specification for packaged product only.

5. Minimum input for line regulation test is set to VOUT + 1V relative to the highest output voltage.

6. Dropout voltage is defined as the input-to-output differential at which the output voltage drops 2% below its nominal value measured at 1Vdifferential.

For outputs below 2.25V, dropout voltage is the input-to-output voltage differential with the minimum input voltage 2.25V. Minimum input operating

voltage is 2.25V.

MIC2210 Datasheet(PDF) 5 Page - Micrel Semiconductor

MIC2210 Datasheet(HTML) 5 Page - Micrel Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Download

Link URL