Fast, Rail-to-Rail, Low Power, 2.5 V to 5.5 V,

Single-Supply TTL/CMOS Comparator

Data Sheet

AD8469

Rev. 0

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

www.analog.com

Fax: 781.461.3113

©2012 Analog Devices, Inc. All rights reserved.

FEATURES

Qualified for automotive applications

Low glitch TTL-/CMOS-compatible output stage

40 ns propagation delay

Low power: 1.4 mW at 2.5 V

Shutdown pin

Programmable hysteresis

Power supply rejection better than −50 dB

−40°C to +125°C operation

APPLICATIONS

High speed instrumentation

Clock and data signal restoration

Logic level shifting or translation

High speed line receivers

Threshold detection

Peak and zero-crossing detectors

High speed trigger circuitry

Pulse-width modulators

Current/voltage controlled oscillators

GENERAL DESCRIPTION

The AD8469 is a fast comparator fabricated on XFCB2, an

Analog Devices, Inc., proprietary process. This comparator is

exceptionally versatile and easy to use. Features include an input

CMOS-compatible output drivers, adjustable hysteresis control,

and a shutdown input. The device offers a 40 ns propagation

delay driving a 15 pF load with 10 mV overdrive on 500 µA

typical supply current.

A flexible power supply scheme allows the device to operate

from a single +2.5 V positive supply with a −0.2 V to +2.7 V

input signal range up to a +5.5 V positive supply with a −0.2 V

to +5.7 V input signal range.

The TTL-/CMOS-compatible output stage is designed to drive

up to 15 pF with full rated timing specifications and to degrade

in a graceful and linear fashion as additional capacitance is added.

The input stage of the comparator offers robust protection against

large input overdrive, and the outputs do not phase reverse when

the valid input signal range is exceeded.

The AD8469 is available in an 8-lead MSOP package and features

a shutdown pin and hysteresis control. It is fully specified over

an operating temperature range of −40°C to +125°C.

FUNCTIONAL BLOCK DIAGRAM

INPUT

INPUT

Q OUTPUT

Q OUTPUT

HYS INPUT

AD8469

TTL/CMOS

Figure 1.