H5CL

H5CL

2

Specifications

Item

H5CL-A

j (AC models)

H5CL-AD

j (DC models)

Classification

Digital timer

Mounting

DIN track, surface, and flush mounting

(common)

Flush mounting

External connections

Socket

Screw terminals

Enclosure ratings

Panel surface: IEC IP66 and NEMA Type 4 (indoors) when Y92S-29 rubber packing is used.

Digits

4 digits (zero suppress method)

Max. time settings

9.999 s (0.001-s unit), 99.99 s (0.01-s unit), 999.9 s (0.1-s unit), 9999 s (1-s unit),

99 min 59 s (1-s unit), 999.9 min (0.1-min unit), 99 h 59 min (1-min unit), 999.9 h (0.1-h unit)

Display modes

Up (increment) and Down (decrement) (selectable)

Input signals

Start, gate, reset, and key protection

Input method

No-voltage input: via NPN transistor or switching of contact

Operating modes

A (signal ON-delay), F (accumulative operation) (selectable)

Reset system

Power reset (A (signal ON-delay) mode only), external, manual resets

Sensor waiting time

216 ms typ., 250 ms max. (Control output is turned OFF and no input is accepted during

sensor waiting time.)

External power supply

50 mA at 12 VDC (

±10%)

---

Display

7-segment LEDs (12 mm high, red LEDs for the present value, and 8 mm high, green LEDs for

the set value)

Memory backup

EEP-ROM (overwritten 200,000 times min.), which can store data for 20 years min.

Mounting method

DIN track mounting, surface mounting, and

flush mounting

Flush mounting

Approved standards

UL 508, CSA C22.2 No.14

Conforms to EN61010-1

Ratings

Item

H5CL-A

j (AC models)

H5CL-AD

j (DC models)

Rated supply voltage

100 to 240 VAC, 50/60 Hz

12 to 24 VDC (permissible ripple: 20% (p-p) max.)

Operating voltage range

85 to 264 VAC, 50/60 Hz

10.8 to 26.4 VDC

Power consumption

Approx. 10 VA

Approx. 3 W

Start, reset, gate inputs

Min. pulse width: 1 ms/20 ms (selectable, same for all three inputs)

Key protection input

Response time: 1 s max.

Power reset

Min. power opening time: 0.5 s (excluding F (accumulative operation) mode)

Control output

Contact output:

SPDT, 3 A at 250 VAC, resistive load (cos

φ =1)

Min. applicable load: 10 mA at 5/24 VDC (P level, for reference value)

Transistor output: NPN open collector, 100 mA max. at 30 VDC max.,

residual voltage 1.5 VDC max.