AD1317 datasheet(3/12 Pages) AD

3 / 12 page

AD1317

–3–

REV. A

ABSOLUTE MAXIMUM RATINGS

Power Supply Voltage

+VS to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +12 V

–VS to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –9 V

Difference from +VS to –VS . . . . . . . . . . . . . . . . . . . . +16 V

Inputs

VINA/B, VINA, VINB . . . . . . . +VS – 13.5 V, –VS + 13.7 V

LEA, LEA, LEB, LEB . . . . . . . . . . +VS – 14 V, –VS + 12 V

IE,

IE . . . . . . . . . . . . . . . . . . . . . . +V

S – 14 V, –VS + 10.3 V

Outputs

QA,

QA, QB, QB . . . . . . . . . . GND – 0.5 V, GND + 3.5 V

Operating Temperature Range . . . . . . . . . . . . . 0

°C to +70°C

Storage Temperature Range

After Soldering . . . . . . . . . . . . . . . . . . . . . –65

°C to + 125°C

Lead Temperature Range (Soldering 20 sec)

. . . . . . . +300

°C

NOTES

1Stresses above those limits under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

sections of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

2Limits apply for shorted output.

3To ensure lead coplanarity (

±0.002 inches) and solderability, handling with bare

hands should be avoided and the device should be stored in an environment at

°C ±5°C (75°F ±10°F) with relative humidity not to exceed 65%.

WINDOW COMPARATOR PIN ASSIGNMENT

Pin No.

Description

VINA

Noninverting Comparator A Input

VINA/B

Window Comparator Common Input

VINB

Inverting Comparator B Input

Input Enable

6–VS

Negative Supply, –5.2V

GND

Ground

8+VS

Positive Supply, +10 V

LEB

Latch Enable B

LEB

Latch Enable B

Comparator B Output

Comparator A Output

LEA

Latch Enable A

LEA

Latch Enable A

ORDERING GUIDE

Temperature

Package

Model

Range

Description

Option*

Quantity

AD1317KZ

°C to +70°C

16-Lead

Z-16A

1-24

Gull Wing

25–99

100+

*Z = Ceramic Leaded Chip Carrier.

CONNECTION DIAGRAMS

Dimensions shown in inches and (mm).

WARNING!

ESD SENSITIVE DEVICE

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the AD1317 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

AD1317 Datasheet(PDF) 3 Page - Analog Devices

AD1317 Datasheet(HTML) 3 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL