AD5532HS datasheet(4/12 Pages) AD

4 / 12 page

REV. 0

AD5532HS

–4–

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although

the AD5532HS features proprietary ESD protection circuitry, permanent damage may occur on

devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are

recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

ABSOLUTE MAXIMUM RATINGS

1, 2

(TA = 25

°C unless otherwise noted)

VDD to AGND . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +17 V

VSS to AGND . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –17 V

AVCC to AGND, DAC_GND . . . . . . . . . . . . . –0.3 V to +7 V

DVCC to DGND . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V

Digital Inputs to DGND . . . . . . . . . . –0.3 V to DVCC + 0.3 V

REF_IN to AGND, DAC_GND . . . . . . . . . . . –0.3 V to +7 V

VOUT0–VOUT31 to AGND . . . . . . . VSS – 0.3 V to VDD + 0.3 V

VOUT0–VOUT31 to VSS . . . . . . . . . . . . . . . . . . –0.3 V to +24 V

OFFS_IN to AGND . . . . . . . . . . . VSS – 0.3 V to VDD + 0.3 V

AGND to DGND . . . . . . . . . . . . . . . . . . . . . –0.3 V to +0.3 V

Operating Temperature Range

Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . –40

°C to +85°C

Storage Temperature Range . . . . . . . . . . . . –65

°C to +150°C

Junction Temperature (TJ max) . . . . . . . . . . . . . . . . . . 150

°C

74-Lead LFBGA Package,

θJA Thermal Impedance . . . 41°C/W

Reflow Soldering

Peak Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 220

°C

Time at Peak Temperature . . . . . . . . . . . . 10 sec to 40 sec

Max Power Dissipation at TA = 70

°C,

Outputs Loaded . . . . . . . . . . . . . . . . . . . . . . . . . . 550 mW

(for TA > 70

°C, derate at 26 mW for each °C over 70°C)

NOTES

1 Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those listed in the operational

sections of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

2 Transient currents of up to 100 mA will not cause SCR latch-up.

3 This limit includes load power and applies only when there is a resistive load on

VOUT outputs.

ORDERING GUIDE

Output

Package

Model

Function

Voltage Span

Description

Option

AD5532HSABC

32 DACs

5 V

74-Ball LFBGA

BC-74

DAC CODE

FULL-SCALE

ERROR

ACTUAL

IDEAL

OFFSET

ERROR

16k

Figure 2. DAC Transfer Function (OFFS_IN = 0)

AD5532HS Datasheet(PDF) 4 Page - Analog Devices

AD5532HS Datasheet(HTML) 4 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL