AOB210L datasheet(2/6 Pages) AOSMD

2 / 6 page

AOT210L/AOB210L

Symbol

Min

Typ

Max

Units

BVDSS

VDS=30V, VGS=0V

TJ=55°C

IGSS

100

VGS(th)

Gate Threshold Voltage

1.7

2.2

ID(ON)

400

2.4

2.9

TJ=125°C

3.7

4.7

gFS

VSD

0.65

105

Ciss

2800

3520

4300

Coss

920

1320

1720

Crss

120

0.5

1.5

Ω

Qg(10V)

Qg(4.5V)

Qgs

Qgd

tD(on)

tD(off)

trr

Qrr

THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL

COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING

OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,

FUNCTIONS AND RELIABILITY WITHOUT NOTICE.

Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/µs

Maximum Body-Diode Continuous Current

Input Capacitance

Output Capacitance

Turn-On DelayTime

DYNAMIC PARAMETERS

Turn-On Rise Time

Turn-Off DelayTime

VGS=10V, VDS=20V, RL=0.75Ω,

RGEN=3Ω

Gate resistance

VGS=0V, VDS=0V, f=1MHz

Turn-Off Fall Time

Total Gate Charge

VGS=10V, VDS=15V, ID=20A

Gate Source Charge

Gate Drain Charge

Total Gate Charge

SWITCHING PARAMETERS

VDS=0V, VGS= ±20V

Zero Gate Voltage Drain Current

Gate-Body leakage current

Forward Transconductance

VDS=VGS ID=250µA

VGS=10V, ID=20A

TO220

Diode Forward Voltage

VGS=10V, ID=20A

TO263

IS=1A,VGS=0V

VDS=5V, ID=20A

Electrical Characteristics (TJ=25°C unless otherwise noted)

STATIC PARAMETERS

Parameter

Conditions

IDSS

µA

Body Diode Reverse Recovery Time

Drain-Source Breakdown Voltage

On state drain current

ID=250µA, VGS=0V

VGS=10V, VDS=5V

Reverse Transfer Capacitance

IF=20A, dI/dt=500A/µs

VGS=0V, VDS=15V, f=1MHz

RDS(ON)

Static Drain-Source On-Resistance

VGS=4.5V, ID=20A

TO220

VGS=4.5V, ID=20A

TO263

2.7

3.5

2.1

2.6

3.7

Ω

A. The value of RθJA is measured with the device mounted on 1in

2 FR-4 board with 2oz. Copper, in a still air environment with T

A =25°C. The Power

dissipation PDSM is based on R θJA and the maximum allowed junction temperature of 150°C. The value in any given application depends on the user's

specific board design, and the maximum temperature of 175°C may be used if the PCB allows it.

B. The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation

limit for cases where additional heatsinking is used.

C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=175°C. Ratings are based on low frequency and duty cycles to keep initial TJ

=25°C.

D. The RθJA is the sum of the thermal impedence from junction to case RθJC and case to ambient.

E. The static characteristics in Figures 1 to 6 are obtained using <300

µs pulses, duty cycle 0.5% max.

F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a

maximum junction temperature of TJ(MAX)=175°C. The SOA curve provides a single pulse rating.

G. The maximum current rating is package limited.

H. These tests are performed with the device mounted on 1 in

2 FR-4 board with 2oz. Copper, in a still air environment with T

A=25°C.

Rev0 : Sep 2010

www.aosmd.com

Page 2 of 6

AOB210L Datasheet(PDF) 2 Page - Alpha & Omega Semiconductors

AOB210L Datasheet(HTML) 2 Page - Alpha & Omega Semiconductors

Html Pages

1 2 3 4 5 6

Datasheet Download

Link URL