IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make

changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated

Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its

products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe

property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-CPC2017N-R03

©Copyright 2012, IXYS Integrated Circuits Division

OptoMOS® is a registered trademark of IXYS Integrated Circuits Division

All rights reserved. Printed in USA.

12/17/2012

For additional information please visit our website at: www.ixysic.com

6

CPC2017N

MECHANICAL DIMENSIONS

CPC2017N

CPC2017N Tape & Reel

Dimensions

mm

(inches)

PCB Land Pattern

2.184 MAX

(0.086 MAX)

0.838 ± 0.102

(0.033 ± 0.004)

0.381 ± 0.051

(0.015 ± 0.002)

Lead to Package Standoff

MIN 0.0254 (0.001)

(MAX 0.102 (0.004)

0.432 ± 0.127

(0.017 ± 0.005)

0.203 ± 0.025

(0.008 ± 0.001)

1.016 ± 0.025

(0.040 ± 0.001)

5.60

(0.22)

1.30

(0.051)

0.55

(0.022)

2.54

(0.100)

9.347 ± 0.203

(0.368 ± 0.008)

6.096 ± 0.102

(0.240 ± 0.004)

3.810 ± 0.051

(0.150 ± 0.002)

2.540 TYP

(0.100 TYP)

Pin 1

NOTES:

1. All dimensions in millimeters

2. 10 sprocket hole pitch cumulative tolerance ± 0.20.

3. Carrier camber is within 1mm in 250mm.

4. Tape material : Black Conductive Polystyrene Alloy.

5. All dimensions meet EIA-481-C requirements.

6. Thickness : 0.30 ± 0.05mm.

7. Component load per 13” reel : 2000 pcs.

7.50 ± 0.10

16.00 ± 0.30

1.75 ± 0.10

8.00 ± 0.10

4.00 ± 0.10

2.00 ± 0.10

9.65 ± 0.10

6.50

1.20

2.85 ± 0.10

2.35 ± 0.10

6.55 ± 0.10

3.50

Ø1.50

+0.1, -0

Ø1.50 MIN

Embossment

Embossed Carrier

Top Cover

Tape Thickness

0.102 MAX.

(0.004 MAX.)

330.2 DIA.

(13.00 DIA.)