AT2PE1 datasheet(3/10 Pages) ETC1

3 / 10 page

DZ5 Cable Ends

Packaging

09/98

3 Packaging Choices

Strip of 10 tear-off bags

for sizes

≥ 0.25 mm2 to ≤ 4 mm2

Individual Bag of 20 or 100 Cable Ends

for sizes 6 mm2 to 50 mm2

Dispensing packs of 200, 100 or 50 Cable Ends

• for sizes 0.5 mm2 to 2.5 mm2 (single conductor cable ends)

• for sizes 2 x 0.7 mm2 to 2 x 2.5 mm2 (twin conductor cable ends)

Dispensing packs are boxed in specially designed cartons, with each carton containing 5 packs.

This packaging method simpliﬁes use by:

• Avoiding mixing different sized cable ends

• Using colored packs which match the color-coded sleeves of the enclosed cable ends

• Allowing regulated distribution (A) and quick restorage of unused cable ends (C)

• Incorporating a catchment tray for the released cable ends (B)

Gently squeeze the sides of the insulated cable end dispensing packs (3) for a regulated supply of cable

ends into a catchment tray (4). The ﬂow stops as the sides of the pack are released. To facilitate storage,

the dispensing packs are boxed in lots of 5 in a self-feeding carton (1) with a special cut-out in the base

for removing the dispensing packs. An inspection window (2) above the feeder cut-out enables instant

veriﬁcation of the number of dispensing packs remaining in the carton. The color of the dispensing pack

matches the insulated sleeve color coding of the enclosed Telemecanique cable ends. Selection of the

correct size cable ends (see pages 5 and 7 for color codes) is therefore very quick and simple.

1 Carton

2 Inspection

Window

3 Dispensing

Pack

4 Catchment

Tray

AT2PE1 Datasheet(PDF) 3 Page - List of Unclassifed Manufacturers