MPX5700 SERIES

2

Motorola Sensor Device Data

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range(1)

POP

0

—

700

kPa

Supply Voltage(2)

VS

4.75

5.0

5.25

Vdc

Supply Current

Io

–

7.0

10

mAdc

Zero Pressure Offset(3)

(0 to 85

°C)

Voff

0.088

0.2

0.313

Vdc

Full Scale Output(4)

(0 to 85

°C)

VFSO

4.587

4.7

4.813

Vdc

Full Scale Span(5)

(0 to 85

°C)

VFSS

—

4.5

—

Vdc

Accuracy(6)

(0 to 85

°C)

—

—

—

± 2.5

%VFSS

Sensitivity

V/P

—

6.4

—

mV/kPa

Response Time(7)

tR

—

1.0

—

ms

Output Source Current at Full Scale Output

IO+

—

0.1

—

mAdc

Warm–Up Time(8)

—

—

20

—

ms

Decoupling circuit shown in Figure 4 required to meet electrical specifications.

MECHANICAL CHARACTERISTICS

Characteristic

Symbol

Min

Typ

Max

Unit

Weight, Basic Element (Case 867)

—

—

4.0

—

Grams

Cavity Volume

—

—

—

0.01

IN3

Volumetric Displacement

—

—

—

0.001

IN3

NOTES:

1. 1.0 kPa (kiloPascal) equals 0.145 psi.

2. Device is ratiometric within this specified excitation range.

3. Offset (Voff) is defined as the output voltage at the minimum rated pressure.

4. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure.

5. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the

minimum rated pressure.

6. Accuracy (error budget) consists of the following:

• Linearity:

Output deviation from a straight line relationship with pressure over the specified pressure range.

• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is

cycled to and from the minimum or maximum operating temperature points, with zero differential pressure

applied.

• Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from the

minimum or maximum rated pressure, at 25

°C.

• TcSpan:

Output deviation over the temperature range of 0

° to 85°C, relative to 25°C.

• TcOffset:

Output deviation with minimum rated pressure applied, over the temperature range of 0

° to 85°C, relative

to 25

°C.

• Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.

7. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to

a specified step change in pressure.

8. Warm–up is defined as the time required for the device to meet the specified output voltage after the pressure has been stabilized.

9. P2 max is 500 kPa.