ST7FLITE25F2M6 datasheet(35/166 Pages) STMICROELECTRONICS

35 / 166 page

ST7LITE20F2 ST7LITE25F2 ST7LITE29F2

Supply, reset and clock management

Doc ID 8349 Rev 5

35/166

tSTAB (see Figure 12 below and Figure 64: RC oscillator and PLL characteristics (tested

for TA=-40to+85°C) @VDD =4.5 to 5.5V).

Refer to Section 7.6.4: Register description for a description of the LOCKED bit in the

SICSR register.

7.3

Main clock control/status register (MCCSR)

Read / Write

Reset value: 0000 0000 (00h)

●

Bits 7:2 = Reserved, must be kept cleared

●

Bit 1 =

MCO Main Clock Out enable

This bit is read/write by software and cleared by hardware after a reset. This bit allows

to enable the MCO output clock.

0: MCO clock disabled, I/O port free for general purpose I/O.

1: MCO clock enabled.

●

Bit 0 =

SMS Slow Mode select

This bit is read/write by software and cleared by hardware after a reset. This bit selects

the input clock fOSC2 or fOSC2/32.

0: Normal mode (fCPU = fOSC2

1: Slow mode (fCPU = fOSC2/32)

RC control register (RCCR)

Read / Write

Reset value: 1111 1111 (FFh)

●

Bits 7:0 =

CR[7:0] RC oscillator frequency adjustment bits

These bits must be written immediately after reset to adjust the RC oscillator frequency

and to obtain an accuracy of 1%. The application can store the correct value for each

voltage range in EEPROM and write it to this register at startup.

00h = maximum available frequency

FFh = lowest available frequency

Note:

To tune the oscillator, write a serie of different values in the register until the correct

frequency is reached. The fastest method is to use a dichotomy starting with 80h.

0000

MCO

SMS

CR70

CR60

CR50

CR40

CR30

CR20

CR10

CR0

ST7FLITE25F2M6 Datasheet(PDF) 35 Page - STMicroelectronics

ST7FLITE25F2M6 Datasheet(HTML) 35 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL