LM148JSLASHPB datasheet(2/22 Pages) TI1

2 / 22 page

LM148-N, LM248-N, LM348-N

SNOSBT2E – MAY 1999 – REVISED MARCH 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2)

LM148

LM248

LM348

Supply Voltage

±22V

±18V

Differential Input Voltage

±44V

±36V

Output Short Circuit Duration(3)

Continuous

Power Dissipation (Pd at 25°C) and Thermal Resistance (θjA)

(4)

PDIP (NFF) Pd

—

750 mW

θJA

—

100°C/W

CDIP (J) Pd

1100 mW

800 mW

700 mW

θJA

110°C/W

Maximum Junction Temperature (TjMAX)

150°C

110°C

100°C

−55°C ≤ TA ≤

−25°C ≤ TA ≤

0°C

≤ TA ≤ +70°C

Operating Temperature Range

+125°C

+85°C

Storage Temperature Range

−65°C to +150°C

Lead Temperature (Soldering, 10 sec.) Ceramic

300°C

Lead Temperature (Soldering, 10 sec.) Plastic

260°C

Soldering Information

Dual-In-Line Package

Soldering (10 seconds)

260°C

Vapor Phase (60 seconds)

215°C

Small Outline Package

Infrared (15 seconds)

220°C

ESD tolerance(5)

500V

(1)

Refer to RETS 148X for LM148 military specifications.

(2)

If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.

(3)

Any of the amplifier outputs can be shorted to ground indefinitely; however, more than one should not be simultaneously shorted as the

maximum junction temperature will be exceeded.

(4)

The maximum power dissipation for these devices must be derated at elevated temperatures and is dictated by TJMAX, θJA, and the

ambient temperature, TA. The maximum available power dissipation at any temperature is Pd = (TJMAX − TA)/θJA or the 25°C PDMAX,

whichever is less.

(5)

Human body model, 1.5 k

Ω in series with 100 pF.

Electrical Characteristics

These specifications apply for VS = ±15V and over the absolute maximum operating temperature range (TL ≤ TA ≤ TH) unless

otherwise noted.

LM148

LM248

LM348

Units

Parameter

Conditions

Min

Typ

Max

Min

Typ

Max

Min

Typ

Max

Input Offset Voltage

TA = 25°C, RS ≤ 10 kΩ

1.0

5.0

1.0

6.0

1.0

6.0

Input Offset Current

TA = 25°C

Input Bias Current

TA = 25°C

100

200

Input Resistance

TA = 25°C

0.8

2.5

0.8

2.5

0.8

2.5

Supply Current All

TA = 25°C, VS = ±15V

2.4

3.6

2.4

4.5

2.4

4.5

Amplifiers

TA = 25°C, VS = ±15V

Large Signal Voltage Gain

160

V/mV

VOUT = ±10V, RL ≥ 2 kΩ

TA = 25°C, f = 1 Hz to 20 kHz

Amplifier to Amplifier

(Input Referred)

−120

Coupling

See Crosstalk Test Circuit

TA = 25°C,

Small Signal Bandwidth

1.0

MHz

LM148 Series

TA = 25°C,

Phase Margin

degrees

LM148 Series (AV = 1)

Submit Documentation Feedback

Product Folder Links: LM148-N LM248-N LM348-N

LM148J/PB Datasheet(PDF) 2 Page - Texas Instruments

LM148J/PB Datasheet(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Datasheet Download

Link URL