Circuit Note

CN-0285

Rev. 0 | Page 5 of 5

Getting Started

See the UG-521 User Guide for software installation and test setup.

The user guide also includes the block diagram, the application

schematic, the bill of materials, and the layout and assembly

information. In addition, see the ADF4351 data sheet and the

ADL5375 data sheet for additional details.

Functional Block Diagram

See Figure 1 and Figure 6 in this document, and also see the

UG-521 User Guide.

Setup and Test

After setting up the equipment, use standard RF test methods to

measure the sideband suppression of the circuit.

LEARN MORE

CN0285 Design Support Package:

http://www.analog.com/CN0285-DesignSupport

ADIsimPLL Design Tool

ADIsimPower Design Tool

ADIsimRF Design Tool

AN-0996 Application Note. The Advantages of Using a

Quadrature Digital Upconverter (QDUC) in Point-to-Point

Microwave Transmit Systems. Analog Devices.

AN-1039 Application Note. Correcting Imperfections in IQ

Modulators to Improve RF Signal Fidelity. Analog Devices.

Data Sheets and Evaluation Boards

ADF4351 Data Sheet

ADF4351 Evaluation Board

ADL5375 Data Sheet

ADL5375 Evaluation Board

ADP150 Data Sheet

ADP3334 Data Sheet

REVISION HISTORY

2/13—Revision 0: Initial Version

(Continued fromfirst page)Circuits from the Lab circuits are intended only for use with Analog Devices products and are the intellectual property of Analog Devices or its licensors. While you

may use the Circuits from the Lab circuits in the design of your product, no other license is granted by implication or otherwise under any patents or other intellectual property by

application or use of the Circuits from the Lab circuits. Information furnished by Analog Devices is believed to be accurate and reliable. However, Circuits from the Lab circuits are supplied

"as is" and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability, noninfringement or fitness for a particular

purpose and no responsibility is assumed by Analog Devices for their use, nor for any infringements of patents or other rights of third parties that may result from their use. Analog Devices

reserves the right to change any Circuits from the Lab circuits at any time without notice but is under no obligation to do so.

©2013 Analog Devices, Inc. All rights reserved. Trademarks and

registered trademarks are the property of their respective owners.

CN10921-0-2/13(0)