14

ASIX Multi-Port Ethernet Controller

Product Introduction

6-4. AX88613 Demo Board

The following is the picture of AX88613 demo board for your reference.

Figure 14. AX88613 Demo Board

The following are the jumper configuration table of the AX88613 demo board.

Jumper

Setting

Description

JP1(1,3)

JP1(2,4)

Select EEPROM Type

Open

Open

None

Open

Short

93C46

Short

Open

93C56

JP1

Short

Short

93C66 (Default)

J2, J3

MII/Rev-MII/RMII/Rev-RMII interface connector

Open (Default)

No supply

50MHz reference clock from TX_CLK

(pin #54) to RX_CLK (pin #71)

J4

Short

Supply 50MHz reference clock from TX_CLK

(pin #54) to RX_CLK (pin #71) for RMII or

Rev-RMII mode

Open (Default)

No supply 5V power source to J3 MII interface

connector

J6

Short

Supply 5V power source to J3 MII interface

connector

Figure 15. AX88613 Demo Board Jumper Setting Table

Copyright (C) 2008-2009 Reserved by ASIX Electronics Corporation