| Electronic Components Datasheet Search |
|
TORX141PL Datasheet(PDF) 3 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TORX141PL Datasheet(HTML) 3 Page - Toshiba Semiconductor |
|
3 / 20 page ![]() 3 Optical fiber Cable Optical fiber cable consists of two parts. The center is called the core, the outer layer is called the cladding. The refractive index of the core is higher than that of the cladding. The effect of this arrangement is that when an optical ray is propagated at an angle to the axis of the cable, it is reflected back at the boundary between the core and the cladding, and thereby transmitted longitudinally through the core. There are three kinds of optical fiber: a) All-plastic fiber (APF) b) Plastic-cladding silica Fiber (PCF) c) Silica fiber APF is used for short-distance data transmission. Both the core and the cladding are made of plastic. PCF, which is used for middle distance transmission, has silica core and plastic cladding.Silica fiber is used for long- distance transmission. Both the core and the cladding are made of silica. TOSLINK circuit configuration Construction of TOSLINK Optical transmission module The LED is driven by a differential circuit in the transmission module, making it possible to decrease current fluctuation when the LED is either on or off. For this reason, this module has no effect on other circuits around it. Optical receiving module An ATC (automatic threshold control) circuit is used to reshape the waveform in the receiving module. The ATC circuit controls the comparator reference voltage so that it is always automatically adjusted as the input optical power changes. For this reason there will be little pulse width distortion even when the length or degree of bending conditions of the optical fiber are changed. There are two package types available for TOSLINK's internal optical units. One is a molded resin package. It is used for ordinary applications. The other is ceramic, used for applications requiring exceptionally high reliability. The structure of the internal units of these two packages is shown in the figure on the right. In the case of the molded resin type, the devices are mounted on a lead frame and molded in with transparent resin. In the ceramic package the devices are mounted on a ceramic substrate, and hermetically sealed by a metal shell. The ceramic package features better resistance against humidity and temperature than the molded resin type. Structure of optical fiber cable Block diagram of transmission module Block diagram of receiving module Structure of internal units Molded resin package Ceramic package Ceramic Substrate Capacitor Capacitor Lead frame Lead frame Metallic shell Bonding pad Bonding wire PD PD Receiving IC Receiving IC Resin mold VCC GND1 Output GND2 4 3 2 1 Amp circuit ATC circuit Reference voltage generating circuit Receiving IC Comparator VCC IF-CONT Input GND Transmitting IC 4 3 2 1 LED Optical ray Sheathing Cladding (low refractive index for confinement of light) Core (high refractive index for transmission of light) |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |