Assembly — Part No. MA100

Power interconnect assembly for voltage select models of

the M series. Simplifies connection of power entry module

to power supply. Designed for use with either filtered or

unfiltered voltage selection models. 8.5" wire leads.

Part No. MA101 - Plug Only

Part No. MA102 - Pins on Strips

Part No. MA103 - Pins on Reel (7,000 pins)

Part No. MA104 - Pins Only

Assembly — Part No. MA400

Medical safety bracket kit for use with HM models. Bracket

allows customer to undergo UL544 abnormal condition

testing without removal of fuse(s) in power entry module.

Part No. MA401 - Bracket Only

Part No. MA402 - Standoff Only

Voltage Card — Part No. MA302

Two-voltage selection capability for use with M series

power entry modules. Marked 120V/240V. One MA302

comes standard with two-voltage M series modules.

Voltage Card — Part No. MA304

Four-voltage selection capability for use with M series

power entry modules. Marked 100V/120V/230V/240V.

One MA304 comes standard with four-voltage M series

modules.

143

Catalog 1654001

Dimensions are in inches and

Dimensions are shown for

USA Cust. Svc.: 1-800-468-2023

www.corcom.com

Revised 05-07

millimeters unless otherwise

reference purposes only.

CORCOM Prods: 1-847-680-7400

www.tycoelectronics.com

specified. Values in italics

Specifications subject

Germany:

49-89-6089-0

are metric equivalents.

to change.

CORCOM Product Guide

M Series - Power Entry Modules

P Series

Insulating Boot — Part No. MA601

Plastic shroud to cover back of VM and EFM power entry

modules preventing inadvertent access to tracings.

Part No. MA601 - fits M4S versions

Part No. MA602 - fits M1S versions

Part No. MA603 - fits M4 versions

Part No. MA604 - fits M1 versions

Assembly — Part No. PA100

Power connector assembly for voltage select modules of

the P series. Simplifies the connection of power entry mod-

ule to power supply. Designed for use with either filtered or

unfiltered modules. Includes 6 inch wires (4).

Part No. PA101 - Plug Only

Part No. PA102 - Pins Only

Part No. PA105 - Same as PA100, except has 2 wires for

no voltage selection models

J Extender — Part No. PA400

Extends P series module to fit J panel cutout. Cannot be

used with B shield.

L Extender — Part No. PA410

Extends P series width to fit L panel cutout (use two per

module). Unshielded versions only.

C Extender — Part No. PA420

Extends P series height by .20"

PA101

0

0

4

2