UNITED AUTOMATION LIMITED

1 Southport Business Park

Tel (01704)-565713

Southport, PR8 4HQ, U.K.

Fax (01704)-569760

Page No 2 of 2 Issue 2

17/07/98

Optional extras include: Knob, Dial, Heatsink compound.

RECOMMENDATION

Other documents available on request, which may be appropriate for your applications.

CODE

IDENTITY

DESCRIPTION

X10229

RFI

Filtering recommendations - addressing the EMC Directive

X10213

ITA

Interaction, uses for phase angle and for burst fire control.

X10255

SRA

Safety requirements - addressing the Low Voltage Directive (LVD)

including :- Thermal data /cooling ; “Live” parts warning & Earthing

requirements; Fusing recommendations.

AP02/4

COS

UAL Conditions of sale

NOTE

It is recommended that installation and maintenance of this equipment should be done with

reference to the

current edition of the I.E.E. wiring regulations (BS7671) by suitably qualified/trained

personnel. The regulations contain important requirements regarding safety of electrical equipment. (For

International standards refer to I.E.C directive IEC 950).

CE MARKING

This product family carries a “CE marking”. These phase angle type controllers require a suitable remote filter.

For information see recommendation section and contact our sales desk. (See Declaration of Conformity).

FUSING:

It is recommended to use semiconductor (fast acting) type fuses or circuit breakers (Semiconductor

- MCB) for unit protection. (See SRA Datasheet for further information).

SPECIFICATIONS

UNIT

CSR

CSR

CSR

CSR

CSR

CSR

604A

604B

1004A

1004B

1504A

1504B

RMS max. On state current

A

6

6

10

10

15

15

Peak one cycle surge current

A

100

100

120

120

150

150

Maximum off leakage current

mA

------------------------------- 2 ---------------------------

Minimum holding load current

mA

------------------------------- 30 --------------------------

RMS input voltage +/- 10% @ 50/60 Hz

V

---------------------------- 110/230 ----------------------

Repetitive peak voltage

V

------------------------------ 400 -------------------------

Total conduction phase angle (typical)

degrees

---------------------------- 0 to 160

° ---------------------

Controlled phase angle (typical)

degrees

--------------------------- 30 to 160

° ---------------------

Power

transfer

at

max.

Current

(efficiency)

%

------------------------------ 99 ---------------------------

Tab surface operating range

ºC

--------------------------- 0 to + 70 -----------------------

Storage temperature

ºC

--------------------------- 0 to + 75 -----------------------

Insulation withstand capability

V

----------------------- 1500 for 1 min. ---------------------

--

INSTALLATION

CONNECTIONS

COOLING REQUIREMENTS