TLP700

2010-02-23

10

(2) Precautions for General Storage

1) Do not store devices at any place where they will be exposed to moisture or direct sunlight.

2) When transportation or storage of devices, follow the cautions indicated on the carton box.

3) The storage area temperature should be kept within a temperature range of 5 degree C

to 35 degree C, and relative humidity should be maintained at between 45% and 75%.

4) Do not store devices in the presence of harmful (especially corrosive)gases, or in dusty conditions.

5) Use storage areas where there is minimal temperature fluctuation. Because rapid temperature

changes can cause condensation to occur on stored devices, resulting in lead oxidation or corrosion,

as a result, the solderability of the leads will be degraded.

6) When repacking devices, use anti-static containers.

7) Do not apply any external force or load directly to devices while they are in storage.

8) If devices have been stored for more than two years, even though the above conditions have been

followed, it is recommended that solderability of them should be tested before they are used.