FUJITSU SEMICONDUCTOR

DATA SHEET

Copyright©2012 FUJITSU SEMICONDUCTOR LIMITED All rights reserved

2012.6

Semicustom

CMOS

Standard Cell

CS402 Series

■ DESCRIPTION

The CS402 series of 28 nm standard cells is a line of CMOS ASICs of high-performance with minimum

power consumption.

By the adoption of core transistors with high current drivability operating at low voltages, the operating

frequency approximately twice that of CS401 series is realized at power supply voltages 10% lower than

those of CS401 series.

This series is appropriate for high-performance/high-end applications ranging from the engines of handheld

terminals to telecommunication equipment.

■ FEATURES

• Technology

: 28 nm Metal-gate CMOS

: Maximum 11-metal layers. Ultra low permittivity material is used for inter-layer dielectric.

: Core transistors with different threshold voltages can be used on the same chip

(ultra low leak, low leak, standard, high speed and ultra high speed).

• Supply voltage

: Internal power supply

:

+ 0.9 V ± 0.09 V

: External power supply

:

+ 1.8 V ± 0.15 V

(1.8V interface on dual-power supply system)

• Junction temperature range:

− 40 °C to + 125 °C (Standard specification)

• Operating frequency: Approximately twice that of CS401 series

• Support various types of high-quality cell sets developed by FUJITSU SEMICONDUCTOR (from low power

versions to high speed versions).

• Support SRAMs with standby-mode and power-down mode for lower power consumption memories.

• Compiled cells (RAM, ROM, others)

• Support special interfaces (LVDS, SSTL, others).

• Support boundary SCAN test.

• Support use of industry standard libraries.

• Support use of industry standard tools.

• Short-term development using a physical prototyping tool

• One-pass design using a physical synthesis tool

• Hierarchical design environment for supporting large-scale circuits

• Support Signal Integrity, EMI noise reduction.

• Support static timing sign-off.

• Improve timing convergence by the introduction of Statistical Static Timing Analysis (SSTA).

• Design For Manufacturing (DFM) enables stable product-supply and reduced variation.

• Package lineup: FBGA, PBGA, TEBGA, FC-BGA

Note: Including items under development.

DS601-00002-0v01-E