ATS610LSC

DYNAMIC, PEAK-DETECTING,

DIFFERENTIAL HALL-EFFECT

GEAR-TOOTH SENSOR

APPLICATIONS INFORMATION — Continued

Power Supply Protection and Operation From an

Unregulated Power Supply. The internal voltage

regulator provides immunity to power supply variations

between 5 V and 24 V. In automotive applications, where

the device receives its power from an unregulated supply

such as the battery, full protection is provided by the

internal regulator circuit.

Additional applications Information on gear-tooth and

other Hall-effect sensors is provided in the Allegro Inte-

grated and Discrete Semiconductors Data Book or

Application Note 27701.

MECHANICAL INFORMATION

Component

Material

Function

Units

Package

Polyamide 6/12,

264 psi deflection temp. (DTUL)

200

°C

33% glass filled

Approximate melting temperature

219

°C

Circuit Board

High-temperature FR-4

Glass transition temperature

170

°C

Terminals

1 oz Copper

–

–

Terminal Finish

63/37 tin/lead solder plate

–

†

Flame Class Rating

–

–

UL94V-0

Dwg. MH-023 mm

0.1

A

2.235 mm

† All industry-accepted soldering techniques are permitted for these subassemblies provided the indicated

maximum temperature for each component (e.g., sensor face, plastic housing) is not exceeded. Reasonable

dwell times, which do not cause melting of the plastic housing, should be used.

Sensor Location (in millimeters)

(sensor location relative to package center is the design

objective)