MP62040 datasheet(2/8 Pages) MPS

2 / 8 page

MP62040/MP62041 – 1.7V - 5.5V, 2A POWER DISTRIBUTION SWITCH

MP62040/MP62041 Rev. 1.0

www.MonolithicPower.com

7/18/2011

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

PACKAGE REFERENCE

Part Number

Enable

Switch

Maximum

Continuous Load

Current

Package

Top

Marking

Free Air Temperature (TA)

MP62040DQFU* Active Low

Single

UTQFN4

AGY

–40

C to +85C

MP62041DQFU** Active High

UTQFN4

AEY

* For Tape & Reel, add suffix –Z (e.g. MP62040DQFU–Z).

For RoHS compliant packaging, add suffix –LF (e.g. MP62040DQFU-LF–Z)

** For Tape & Reel, add suffix –Z (e.g. MP62041DQFU–Z).

For RoHS compliant packaging, add suffix –LF (e.g. MP62041DQFU-LF–Z)

PACKAGE REFERENCE

*: EN is active high for MP62041

ABSOLUTE MAXIMUM RATINGS (1)

IN .................................................-0.3V to +6.0V

EN, OUT to GND .........................-0.3V to +6.0V

Continuous Power Dissipation (TA = +25°C)

(2)

UTQFN4 ................................................... .0.7W

Continuous Drain Current

TA = +25°C................................................... ±2A

TA = +85°C................................................ ±1.4A

Pulsed Drain Current

(3).............................. .±6A

Continuous Diode Current

(4)...................-50mA

Junction Temperature...............................150°C

Lead Temperature ....................................260°C

Storage Temperature............... -65°C to +150°C

Maximum Junction Temp. (TJ) ............. +125°C

Thermal Resistance

(5)

θJA

θJC

UTQFN4 ................................ 173 .... 127..

C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ(MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any

ambient

temperature

calculated

PD(MAX)=(TJ(MAX)-TA)/θJA.

Exceeding

the

maximum

allowable power dissipation will cause excessive die

temperature, and the regulator will go into thermal shutdown.

Internal thermal shutdown circuitry protects the device from

permanent damage.

3) Pulse width <300µs and duty cycle < 2%

4) Continuous body diode conduction (reverse conduction) is not

recommended.

5) Measured on JESD51-7, 4-layer PCB.

MP62040 Datasheet(PDF) 2 Page - Monolithic Power Systems

MP62040 Datasheet(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8

Datasheet Download

Link URL