APEM

www.apem.com

A-115

3600NF series

Sealed toggle switches for outdoor applications

Distinctive features and specifications

A

- O-ring between lever and bushing

- half-length boot and nylon washer (supplied mounted)

- elastomer gasket between cover and case

- molded-in terminal inserts

- sealing washer U60

MATERIALS

• Case : phenolic resin

• Actuator : brass, nickel plated

• Bushing : brass, nickel plated

• Contacts : solid silver

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load : 12A 28VDC - 6A 250VAC

• Initial contact resistance : 10 mΩ max. at 1A 2VDC

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength :

2.500 Vrms 50 Hz min. between terminals

3.000 Vrms 50 Hz min. between terminals and frame

• Electrical life : 10.000 cycles at full load

GENERAL SPECIFICATIONS

• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut

• Panel thickness : 2 mm (.079) max. with all accessories

• Operating temperature : -40°C to +85°C

AGENCY APPROVAL

Availability

: consult factory for

details or approved models.

Marking

: to order switches

marked UL, complete last box of

ordering format.

Dimensions

: first dimensions are in mm while inches are shown as bracketted numbers.

ABOUT THIS SERIES

Mounting accessories

: 1 sealing boot U1151, 1 hex nut U166, 1 nylon washer U21 and 1 sealing washer U60. See section I.

Packaging unit

: 25 pieces per type and colour.