SPECIFICATIONS

Specifications are subject to change without notice. Tighter

specifications available (contact factory).

Supply Voltage

1.8 V to 3.3 V ±10%

±25 ppm

Frequency Stability

±10 to ±50 ppm for Commercial

±20 to ±100 ppm for Industrial

±50 to ±100 ppm for Military

Output Load (CMOS)

15 pF

Aging, first year

5 ppm

Shock

5,000 g, 0.3 ms, ½ sine

20 g, 10-2,000 Hz swept sine

1. Other tolerances available.

2. Does not include calibration tolerance. Other tolerances available.

3. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also

available.

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

10217 Rev A

HOW TO ORDER CXOLAT 32.768 kHz SURFACE MOUNT CRYSTAL OSCILLATORS

“S” if special or

custom design.

Blank if Std.

CXOLAT

4

S

N

SM3

,

32.768k / 50

/

50

/

/

I

Frequency

k = kHz

Enable/Disable

Option

E or N

Terminations

Blank = SM1

=Gold Plated

(Lead Free)

SM2 = Solder Plated

SM3 = Solder Dipped

SM4 = Solder Plated

SM5 = Solder Dipped

(Lead Free)

Supply Voltage

1 = 1.8 V

2 = 2.5 V

3 = 3.0 V

4 = 3.3 V

//

50

/

I

Temp. Range:

S= Customer Specified

Total

Frequency

Tolerance

(in ppm)

Temp. Range:

S= Customer Specified

Frequency

Stability over

Temp. Range

(in ppm)

Calibration

Tolerance

(in ppm)

OR

ABSOLUTE MAXIMUM RATINGS

-0.5 V to 5.0 V

Storage Temperature

PACKAGING OPTIONS

CXOLAT

- Tray Pack

- 12 mm tape, 7” or 13” reels

Enable (Pin 3 High*) Disable (Pin 3 Low)

Output

Frequency Output

High Z State

Oscillator

Oscillates

Stops

Current

15

ENABLE/DISABLE OPTIONS (E/N)

For the 32.768 kHz CXOLAT, Statek offers two

enable/disable options: E and N. The E-version has a Tri-

State output and stops oscillating internally when the

output is put into the high Z state. The N-version does not

have PIN 3 connected internally and so has no

enable/disable capability. The following table summarizes

the Enable/Disable option E.

ENABLE/DISABLE OPTION E

FUNCTION TABLE

SYMBOL PARAMETER

MIN

TYP

MAX

UNIT

V

Output Voltage Low

Start-up Time

15

ms

Rise Time (10%-90%)

2.8

10

ns

Fall Time (10%-90%)

2.4

10

ns

Duty Cycle

45

50

55

%

I

DD

Current Consumption

15

ELECTRICAL CHARACTERISTICS

CXOLAT 32.768 kHz

All parameters are measured at 25ºC with a 10MΩ and