STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

10197 REV B

VCXO

16.384 MHz to 130 MHz

Miniature Surface Mount

Voltage-Controlled Crystal Oscillator

DESCRIPTION

Statek’s 5 mm x 7 mm surface mount Voltage-Controlled

Crystal Oscillator is designed for applications requiring a highly-

pullable 3.3 V CMOS-output VCXO with a small footprint.

Offered at frequencies from 16.384 MHz to 130 MHz with

operation over wide temperature ranges (up to -40°C to

+105°C), these VCXOs offer exceptional performance in a

small package.

FEATURES

High Absolute Pull Range (APR)

Low phase noise - Low phase jitter

Wide frequency range

Non-standard frequencies supported

Extended Industrial temperature range

-55ºC option available

APPLICATIONS

Military & Aerospace

Avionics

Communications

Projectiles

PACKAGE DIMENSIONS

Dimension

Minimum

Typical

Maximum

mm

mm

mm

A

6.86

7.00

7.16

B

4.85

5.00

5.16

1.55

1.75

1.95

1.65

1.85

2.05

D

1.19

1.40

1.41

E

1.07

1.27

1.47

TERMINATIONS

Designation

Termination

SM1

Gold Plated (Pb Free)

SM3

Solder Dipped

SM5

Enable (PIN 1 High*)

Disable (PIN 1 Low)

Output

Frequency Output

High Z State

Oscillator

Oscillates

Oscillates

Current

Normal

Lower than normal

ENABLE/DISABLE OPTIONS (T/N)

Statek offers two enable/disable options: T and N. The T-version

has a Tri-State output and continues to oscillate internally when the

output is put into the high Z state. As a result, when re-enabled,

the oscillator does not have to restart and an output with a stable

frequency resumes almost immediately. The N-version does not

have PIN 2 connected internally and so has no enable/disable

capability. The following table describes the Enable/Disable option T.

ENABLE/DISABLE OPTION T FUNCTION TABLE

DIMENSIONS

0.070

(1.80)

0.077

(1.96)

0.100

(2.54)

0.200

(5.08)

0.144

(3.65)

inches

(mm)

SUGGESTED LAND PATTERN

PIN CONNECTIONS

1. Control Voltage (Vc)

2. Enable/Disable (T) or not connected (N)

3. Ground

4. Output

5. Not connected (N)

Low Profile

5mm x 7mm