PROTEKTIVE PAK

13520 MONTE VISTA AVENUE, CHINO, CA 91710

PHONE (909) 627-2578, FAX (909) 363-7331

ProtektivePak.com

DRAWING NUMBER

37790

DATE:

September

2007

TUBE HANDLERS

© 2007 DESCO INDUSTRIES INC.

Employee Owned

SPECIFICATIONS

Properties

Typical Values

Test Procedures/Method

Electrostatic Decay

0.01 seconds at 72°F and 11.8% R.H.

FED-STD-101, Method 4046

Surface Resistance

10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H. for surface. 10E3 - 10E4

ohms/sq. for buried shielding layer

ASTM D257

Surface Resistance, Low R.H. Cut-off

4% R.H.

Rockwell International Test Report of December 20, 1991

High-Voltage Discharge Resistance

Failure rate 0/5 (no oxide damage in five consecutive tests)

Rockwell International Test Report of December 20, 1991

Static Shielding

99.9% attenuation at 10kV; 99.6% attenuation at 30kV

EIA 541, appendix E, capacitive probe test

Charged Device Model (CDM) Safety

RTG >10E7 ohms at 86% R.H. or less

Rockwell International Test Report of December 20, 1991

Current-Carrying Hazard

10E3 mA at 110V; 10E3 mA at 220V

ESD from A to Z

Corrosivity

Contains 1-3 ppm reducible sulfur

FED-STD-101, Method 3005 for reducible sulfur

Antistat Transfer

No transfer

Rockwell International Test Report of January 8, 1992

Water & Isopropyl Alcohol Extraction

Surface resistance 10E8 - 10E9 ohms/square at 74°F

Rockwell International Test Report of January 8, 1992

Tests for Antistat Permanence

and 36% R.H.

Sloughing Test

Negligible surface damage at 10 cycles and <5% of surface damage at 200

ASTM D4060 at 70 rpm with CS-17 abrasive-coated wheels and

cycles in Taber Abrasion Test. No conductive particles abrased from surface

1000 grams load

Rockwell International Test Report of January 8, 1992

Recyclability

Complete recyclability of package

Rockwell International Test Report of January 8, 1992

Biodegradability

Biodegradation in or on moist soil

Volume Conductivity

Conductivity from wall to wall as well as across surface to assure permanence

Rockwell International Test Report of January 8, 1992

of the antistatic property

Shelf Life

Indefinite

Made in America

Features

• Economical and efficient way to store and transport DIP Tubes

and Rails

• Each cell has an extender tab which may be labeled to identify

the contents

• Tube Handler may be rotated on shelves to view the extender

tab either vertically or horizontally

• Cell identification labels included

• Shipped knocked-down; easy to assemble

• Made in America

D

-----------------

W

L

RoHS Compliance Statement

None of the following materials are

intentionally added in manufacturing

this product: lead, mercury, cadmium,

hexavalent chromium, polybrominated

biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE) as outlined in

the Directive 2002/95/EC Article 4.1.

See Protektive Pak Inc. letter on-line at

See reverse side

for available sizes.