AS5262

Datasheet - Application In form atio n

www.ams.com

Revision 1.1

31 - 36

9.7 Programming Procedure



Pull-up on out pin



VDD=5V



Wait 10ms (after the startup time device enters communication mode)



Write command: Trimming bits are written in the OTP RAM



Read command: All the trimming bits are read back to check the correctness of the writing procedure.



Write AS5262KEY in the Fuse register: The OTP RAM content is permanently transferred into the Poly Fuse cells.



Wait 10 ms (fuse time)



Write command, R1K_10K<1:0>=(11)b: Poly Fuse cells are downloaded into the RAM memory using a 10K resistance as reference.



Wait 5 ms (download time)



Read R1K_10K register, the expected value is 00b



Write command, R1K_10K<1:0>=(11)b



Read R1K_10K register, the expected value is (11)b. NB: Step11 and Step12 have to be consecutive.



Read command: all the fused bits downloaded with 10K resistance are read back.



Write command, R1K_10K=<1:0>=(10)b: Poly Fuse cells are downloaded into the RAM memory using a 1K resistance as reference.



Wait 5 ms (download time)



Read R1K_10K register, the expected value is (00)b



Write command register, R1K_10K<1:0>=(10)b



Read R1K_10K register, the expected value is (10)b NB: Step18 and Step19 have to be consecutive.



Read command: All the fused bits downloaded with 1K resistance are read back.



Check that read commands at Steps 5, 13 and 19 are matching



Write AS5262KEY in the Pass2Func register: Device enters normal mode.