Cable Reels

Page <2>

08/12/11 V1.1

www.element14.com

www.farnell.com

www.newark.com

www.cpc.co.uk

Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of

it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces

all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use

made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.

Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)

is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. pro-SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2011.

Specification Table

Description

Material

A

B

C

F

H

T

Part Number

Empty Cable Reel

Thermoplastic

240

120

90

210

310

200

HDP.240

290

260

350

HDP.290

330

295

410

220

HDP.330

Steel

240

210

310

200

HDM.240

Empty Cable Reel

290

260

350

HDM.290

Face Plate

-

-

-

-

-

-

-

FP001

Face Plate with Auxiliary

Winder

-

-

-

-

-

-

-

FP004

Face Plate, Blank

-

-

-

-

-

-

-

FP005

Dimensions : Millimetres

Specifications:

Thermoplastic Types:

A range of empty cable reels with red thermoplastic drums and coated, heavy duty steel stands.

Coated Steel Types:

A range of empty cable reels with red powder coated steel flanges and heavy duty steel frames.

Auxiliary Winder:

Replaces the existing face plate and allows a piece of cable to feed through the front plate and that the reel can be moved further

away from the equipment. A hole in the centre allows access to the drum and when not in use, the cable can be wound onto the

flange for storage.

Loaded Face Plates:

Replaces the existing face plates and feature 3 × 13 A type sockets, BS4343 type sockets.

Dimensions : Millimetres