MCP402XEV datasheet(5/46 Pages) MICROCHIP

5 / 46 page

MCP401X/2X EVALUATION

BOARD USER’S GUIDE

DS51546B-page 1

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

MCP402X Digital Potentiometer Evaluation Board. Items discussed in this chapter

include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the MCP402X Digital Potentiometer Evaluation

Board. The manual layout is as follows:

• Chapter 1. “Product Overview” – Important information about the MCP402X

Digital Potentiometer Evaluation Board.

• Chapter 2. “Installation and Operation” – Includes instructions on how to get

started with this evaluation board.

• Appendix A. “Schematic and Layouts” – Shows the schematic and layout

diagrams for the MCP402X Digital Potentiometer Evaluation Board.

• Appendix B. “Bill Of Materials (BOM)” – Lists the parts used to build the

MCP402X Digital Potentiometer Evaluation Board.

• Appendix C. “Using the BFMP Programmer to Power the Board” – Shows

how to interface the BFMP board with the MCP402X Digital Potentiometer Evalu-

ation Board.

• Appendix D. “Potential Programming Issue of the MCP402XEV” – Discusses

possible programming issues with Rev 1 and Rev 2 of the MCP402X Digital

Potentiometer Evaluation Board.

• Appendix E. “00066_MCP402XEV.ASM Source Code” – Provides information

about the application firmware, as well as the location of the source code.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

MCP402XEV Datasheet(PDF) 5 Page - Microchip Technology

MCP402XEV Datasheet(HTML) 5 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Datasheet Download

Link URL