OPA314

OPA2314

OPA4314

www.ti.com

SBOS563F – MAY 2011 – REVISED AUGUST 2013

3-MHz, Low-Power, Low-Noise, RRIO, 1.8-V CMOS

Operational Amplifier

Check for Samples: OPA314, OPA2314, OPA4314

1

FEATURES

DESCRIPTION

The OPA314 family of single-, dual-, and quad-

2

•

channel operational amplifiers represents a new

•

Wide Supply Range: 1.8 V to 5.5 V

generation of low-power, general-purpose CMOS

•

Low Noise: 14 nV/

√Hz at 1 kHz

amplifiers. Rail-to-rail input and output swings, low

quiescent current (150

•

Gain Bandwidth: 3 MHz

with a wide bandwidth of 3 MHz, and very low noise

•

Low Input Bias Current: 0.2 pA

(14 nV/

√Hz at 1 kHz) make this family very attractive

•

Low Offset Voltage: 0.5 mV

for a variety of battery-powered applications that

require

a

good

balance

between

cost

and

•

Unity-Gain Stable

performance. The low input bias current supports

•

Internal RF/EMI Filter

applications with mega-ohm source impedances.

•

Extended Temperature Range:

The robust design of the OPA314 devices provides

–40°C to +125°C

ease-of-use to the circuit designer: unity-gain stability

with capacitive loads of up to 300 pF, an integrated

APPLICATIONS

RF/EMI rejection filter, no phase reversal in overdrive

•

Battery-Powered Instruments:

conditions, and high electrostatic discharge (ESD)

protection (4-kV HBM).

–

Consumer, Industrial, Medical

–

Notebooks, Portable Media Players

These

devices

are

optimized

for

low-voltage

operation as low as +1.8 V (±0.9 V) and up to +5.5 V

•

Photodiode Amplifiers

(±2.75 V), and are specified over the full extended

•

Active Filters

temperature range of –40°C to +125°C.

•

Remote Sensing

The OPA314 (single) is available in both SC70-5 and

•

Wireless Metering

SOT23-5 packages. The OPA2314 (dual) is offered in

•

Handheld Test Equipment

SO-8, MSOP-8, and DFN-8 packages. The quad-

channel OPA4314 is offered in a TSSOP-14 package.

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2

All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Copyright © 2011–2013, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.