| Electronic Components Datasheet Search |
|
DP820 Datasheet(PDF) 2 Page - 3M Electronics |
|
|
|||||||||||||||||||||||||||||
DP820 Datasheet(HTML) 2 Page - 3M Electronics |
|
2 / 8 page ![]() 3M™ Scotch-Weld™ Acrylic Adhesives DP805 • DP820 - 2 - Typical Cured Properties Product 3M™ Scotch-Weld™ 3M™ Scotch-Weld™ Acrylic Adhesive Acrylic Adhesive DP805 DP820 Color Pale Yellow Pale Yellow Shore D Hardness5 79 75 Full Cure Time6 8-24 hrs. @ 73°F (23°C) 24-48 hrs. @ 73°F (23°C) Elongation7 30% 50-75% Tensile Strength7 3200 psi — Physical Product Scotch-Weld Scotch-Weld Acrylic Adhesive Acrylic Adhesive DP805 DP820 Glass Transition Temperature8 (Tg) 140°F (60°C) 136°F (58°C) Coefficient of Thermal Expansion9 105 x 10-6 180 x 10-6 (units/units/°C) 60-212°F (20-100°C) 68-158°F (20-70°C) Weight Loss at Temperature10 1% @ 275°F (135°C) 1% @ 266°F (130°C) by Thermal Gravimetric Analysis (TGA) 5% @ 451°F (233°C) 5% @ 446°F (230°C) Thermal Product Scotch-Weld Scotch-Weld Acrylic Adhesive Acrylic Adhesive DP805 DP820 Dielectric Constant11 3.6 @ 500 Hz 3.1 @ 500 Hz 3.6 @ 1 KHz 3.0 @ 1 KHz 3.5 @ 10 KHz 2.8 @ 10 KHz 3.4 @ 100 KHz 2.8 @ 100 KHz Dissipation Factor11 0.046 @ 500 Hz 0.083 @ 500 Hz 0.037 @ 1 KHz 0.065 @ 1 KHz 0.023 @ 10 KHz 0.032 @ 10 KHz 0.018 @ 100 KHz 0.022 @ 100 KHz Volume Resistivity12 1.1 x 1014 ohm-cm 2.2 x 1012 ohm-cm Dielectric Strength13 — 3500 volts/mil Surface Resistivity12 2.1 x 1015 ohms 1.6 x 1014 ohms Electrical Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 5. ASTM D-2240. 6. Time to develop 80% of maximum overlap shear values. 7. Tensile and Elongation. Used procedure in 3M Test Method C-3094/ASTM D-882. Samples were 2 in. dumbbells with 0.125 in. neck and .030 in. sample thickness. Separation rate was 2 inches per minute. 8. Determined using DSC and heating rate of 68°F (20°C) per minute. 9. Determined using Thermal Mechanical Analysis (TMA) and heating rate of 41°F (5°C) per minute. First heat values given. 10. By TGA in air at 50°F (10°C)/min. TGA-7. 11. ASTM D-150 at 73°F (23°C). 12. ASTM D-257 at 73°F (23°C). 13. ASTM D-149 at 73°F (23°C). Sample thickness 14 mils. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |