Physical & Mechanical Properties

1) Temperature Range

-40 to 105°C

2) Bend Radius

10X Cable Diameter

3) Pull Tension

5.5 Lbs, Maximum

Electrical Properties

(For Engineering purposes only)

1) Voltage Rating

600 VRMS

2) Inductance

0.04 µH/ft, Nominal

3) Conductor DCR

16.2 /1000ft @20°C, Nominal

Other

Packaging

Flange x Traverse x Barrel (inches)

a) 25000 DR

23 x 20 x 0 Max. 2 separate pieces; Min length/piece 5000 FT.

b) 5000 FT

10 x 4 x 3.5 Continuous length

c) 1000 FT

6.5 x 3 x 3.25 Continuous length

d) 100 FT

3.75 x 2 x 1.75 Continuous length

[Spool dimensions may vary slightly]

www.alphawire.com

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742)

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications

described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not

ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or

implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,

even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out

of or in connection with the use, or inability to use, the information or specifications described herein.

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

RoHS CERTIFICATE OF COMPLIANCE

To Whom It May Concern:

Alpha Wire Part Number:6713

6713 , RoHS-Compliant Commencing With7/1/2009Production

This document certifies that the Alpha part numbers cited above are manufactured in accordancewith Directive 2002/95/EC of the European

Parliament and of the Council of 27 January 2003,better known as the RoHS Directives, with regards to restrictions of the use of certain

hazardoussubstances used in the manufacture of electrical and electronic equipment. The reader is referredto these Directives for the specific

definitions and extents of these Directives. No Exemptions arerequired for RoHS Compliance on this item.

Substance

Maximum Control Value

Lead

0.1% by weight (1000 ppm)