PICASO datasheet(7/24 Pages) ETC2

7 / 24 page

4D SYSTEMS

PICASO Processor

Page 7 of 23

www.4dsystems.com.au

I = Input, O = Output, P = Power, A = Analogue

PICASO Processor Pin Out (continued…)

Symbol

I/O Description

BUS2

I/O

General Purpose Parallel I/O BUS(0..7), bit 2. This pin is 5.0V tolerant.

BUS3

I/O

General Purpose Parallel I/O BUS(0..7), bit 3. This pin is 5.0V tolerant.

BUS4

I/O

General Purpose Parallel I/O BUS(0..7), bit 4. This pin is 5.0V tolerant.

BUS5

I/O

General Purpose Parallel I/O BUS(0..7), bit 5. This pin is 5.0V tolerant.

REF

Internal voltage regulator filter capacitor. Connect a 4.7uF to 10uF capacitor

from this pin to Ground.

Display Write strobe signal. PICASO asserts this signal LOW when writing data

to the display. Connect this pin to the Write (WR) signal of the display.

Display Read strobe signal. PICASO asserts this signal LOW when reading data

from the display. Connect this pin to the Read (RD) signal of the display.

Display Chip Select. PICASO asserts this signal LOW when accessing the

display. Connect this pin to the Chip Select (CS) signal of the display.

Display Register Select.

LOW: Display index or status register is selected.

HIGH: Display GRAM or register data is selected.

Connect this pin to the Register Select (RS or A0 or C/D or similar naming

convention) signal of the display.

IO4/BUS_RD

I/O

General Purpose IO4 pin. Also used for BUS_RD signal to read and latch the

data in to the parallel GPIO BUS(0..7).

IO3

I/O

General Purpose IO3 pin. This pin is 5.0V tolerant.

IO2

I/O

General Purpose IO2 pin. This pin is 5.0V tolerant.

PICASO Datasheet(PDF) 7 Page - List of Unclassifed Manufacturers

PICASO Datasheet(HTML) 7 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Datasheet Download

Link URL