ACT3780 datasheet(1/20 Pages) ACTIVE-SEMI

Part #	ACT3780

Description	50mΩ Battery Switch for Highest Efficiency

PDF	20 Pages

Scroll/Zoom	100%

Manufacturer	ACTIVE-SEMI [Active-Semi, Inc]

Direct Link	http://www.active-semi.com

Logo

1 / 20 page

Innovative PowerTM

- 1 -

www.active-semi.com

Active-Semi Proprietary―For Authorized Recipients and Customers

ActivePath

TM is a trademark of Active-Semi.

ACT3780

Rev 8, 09-Jul-13

ActivePath

TM Battery Charger

ActivePath

DIAGRAM

FEATURES

• ActivePathTM System Power Selection of Best

Available Input Supply

• 50mΩ Battery Switch for Highest Efficiency

• Dynamic Control of Charging Current Allowing

System to Draw Maximum Load from AC/USB

Input

• ±0.5% Battery Charge Voltage Accuracy

• Up to 12V Input with Over Voltage Protection

• Thermal Regulation for Charge Control

• Charge Status Outputs for LED or System

Interface

• Battery Voltage Level Indication

• Programmable Fast Charge Current

• Programmable Charging Timer

• Low Reverse Leakage Current

• Short-Circuit and Thermal Protection

• Preconditioning for Deeply Depleted Battery

• Low Quiescent Current Standby Mode

• Space-Saving, Thermally-Enhanced

TQFN44-20 Packages

APPLICATIONS

• Personal Navigation Devices

• Smart Mobile Phones

• Blue-Tooth Devices

• Portable Media Players

• Portable Devices

GENERAL DESCRIPTION

The ACT3780 is a complete battery-charging and

system power management solution for portable

hand-held equipment using single-cell Lithium-

based batteries. The ACT3780 incorporates Active-

Semi's proprietary ActivePath architecture which

automatically selects the best available input supply

for the system.

The

ActivePath

architecture

performs

three

important functions: First, the battery is charged

while powering with the system, minimizing current

draw from the battery while ensuring that sufficient

current is available to power the system. Second, if

no input supply is available, system power is

automatically switched to the battery. And finally, if

the system load-requirement exceeds the capability

of the input supply, ActivePath automatically

supplements the input with the battery to satisfy the

system's power requirements.

In addition to ActivePath, the ACT3780 charger

features a complete, high-accuracy (±0.5%),

thermally regulated, stand-alone single cell linear

Li+ charger with an integrated 12V power

MOSFET. The ACT3780 is available in a thermally

enhanced 4mm × 4mm Thin-QFN44-20.

Similar Part No. - ACT3780

Manufacturer	Part #	Datasheet	Description
Active-Semi, Inc	ACT3780	147Kb / 2P	ActivePath??Battery Charger 29-May-08
	ACT3780NY-T	147Kb / 2P	ActivePath??Battery Charger 29-May-08
	ACT3780QY-T	147Kb / 2P	ActivePath??Battery Charger 29-May-08
	ACT3780QY-T	101Kb / 2P	ActivePath Battery Charger 05-Dec-12
	ACT3780QY410-T	101Kb / 2P	ActivePath Battery Charger 05-Dec-12

More results

Similar Description - ACT3780

Manufacturer	Part #	Datasheet	Description
Galaxy Power, Inc.	GHTW5V040	910Kb / 8P	TAURUS HC Series Industry?셲 Highest Efficiency DC/DC Converter
Analog Devices	ADP3808	414Kb / 16P	High Efficiency Switch Mode Li-Ion Battery Charger 6/07-Revision 0
Maxim Integrated Produc...	MAX8606	178Kb / 14P	USB/AC Adapter, Li Linear Battery Charger with Integrated 50mΩ Battery Switch in TDFN Rev 1; 12/08
ON Semiconductor	ADP3808A	210Kb / 15P	High Efficiency Switch Mode Li-Ion Battery Charger January, 2009 ??Rev. 1
GREATECS	DX62	1Mb / 8P	DIP Switch Half Pitch SMT for Highest Reliability
OptoSupply Internationa...	OSXXXME1C1S	116Kb / 1P	Xeon 1 Power LED Highest Luminous Flux Super Energy Efficiency
List of Unclassifed Man...	TS52002	1Mb / 14P	High Efficiency NiMH Battery Charger for Photovoltaic Sources
Taoglas antenna solutio...	PAD.71X.A	1Mb / 21P	Highest Efficiency Wide-band Embedded MIMO Antenna
International Rectifier	IRL6283MTRPBF	508Kb / 9P	Load switch for battery application
Shanghai awinic technol...	AW3215A	2Mb / 30P	Switch, efficiency, 1.5 A, lithium battery charging control controller