The copyright and authority for the interpretation of the products are reserved by MORNSUN

TSX01-EX

2013.07.01-A/4

Page 3 of 3

INSTALLATION & DISASSEMBLY

Installation

DIN35mm standard rail installation:

1.Insert the top of the instrument card in the rail;

2.Push the bottom of the instrument into the rail.

Disassembly

1. Use a screwdriver (Width of edge

≤ 6mm), cut in the metal card lock

from the underside;

2. Boost up the screwdriver and pry the metal card lock downwards;

3. Pull the instrument out of the rail.

1

2

3

PACKAGING DIMENSION & PACKAGING DIAGRAM

Note:

1. All specifications are measured at Ta=25

°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.

2. In this datasheet, all the test setup and methods are based on our corporate standards.

3. All characteristics are for listed models, and non-standard models may perform differently. Please contact our technical support for more details.

4. Please contact our technical support for any specific requirement.

5. Specifications of this product are subject to changes without prior notice.

MORNSUN Science & Technology Co.,Ltd.

Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China.

Tel: 86-20-38601850

Fax:86-20-38601272

E-mail: info@mornsun.cn

Http://www.mornsun-power.com