PowerVerter® APS INT Series 2000W

Inverter/Charger with Auto-Transfer Switching and

Hardwire Input/Output

MODEL NUMBER: APSINT2012

Description

Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging

system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to

2000 watts of continuous 230V AC power from any 12V battery or automotive DC source. When hardwire AC

input is energized, commercial power passes through to connected equipment and the battery set is recharged

via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts and

voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of

high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual

for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power

operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large

transformer design, with frequency control powers resistive electronic loads or large inductive motors,

compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch

with full status LEDs provides remote power inverter on/off switching and continuous status information

(APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries

connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for

wet/gel battery types and selectable line to battery power transfer voltages.

Features

Supports 230V AC output from a 230V AC line power source or 12V DC battery source

20 millisecond automatic transfer between line and battery power supports UPS protection during blackouts

and voltage fluctuations for equipment compatible with a one cycle transfer time

Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)

OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions.

3 stage, 15/60 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging

3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full

Highlights

12V DC or 230V AC input; 230V,

50 Hz output (hardwired)

2000 watts continuous, 3000

watts OverPower and 4000 watts

DoubleBoost inverter output (see

specifications)

3 stage, selectable 15/60 amp

wet/dry cell battery charger

Auto Transfer Switching option

for battery backup / UPS

operation

Reliability enhanced

large-transformer design with

protected DC and AC wiring

terminals

Applications

Ideal for RVs, over-the-road

trucking, conversion vans and

fleet service vehicles; a

standalone alternative power

source for off-grid, alternative

energy or export applications and

as an uninterruptible power

supply (UPS) for items

compatible with a 20 millisecond

transfer time. Moisture-resistant

construction enables vehicular or

marine operation in high humidity

environments. NOTE: For sump

pump applications, Tripp Lite

recommends its "UT" Utility Truck

Inverter/Chargers.

Package Includes

APSINT2012 Inverter/Charger

Instruction manual with warranty

information

1 / 4