3

AT24C01A/02/04/08A/16A

5092D–SEEPR–4/07

The AT24C08A only uses the A2 input for hardwire addressing and a total of two 8K

devices may be addressed on a single bus system. The A0 and A1 pins are no

connects.

The AT24C16A does not use the device address pins, which limits the number of

devices on a single bus to one. The A0, A1 and A2 pins are no connects.

WRITE PROTECT (WP): The AT24C01A/02/04/08A/16A has a Write Protect pin that

provides hardware data protection. The Write Protect pin allows normal read/write oper-

ations when connected to ground (GND). When the Write Protect pin is connected to

V

table.

the 1K requires a 7-bit data word address for random word addressing.

AT24C02, 2K SERIAL EEPROM: Internally organized with 32 pages of 8 bytes each,

the 2K requires an 8-bit data word address for random word addressing.

AT24C04, 4K SERIAL EEPROM: Internally organized with 32 pages of 16 bytes each,

the 4K requires a 9-bit data word address for random word addressing.

AT24C08A, 8K SERIAL EEPROM: Internally organized with 64 pages of 16 bytes each,

the 8K requires a 10-bit data word address for random word addressing.

AT24C16A, 16K SERIAL EEPROM: Internally organized with 128 pages of 16 bytes

each, the 16K requires an 11-bit data word address for random word addressing.

Table 2. Write Protect

WP Pin

Status

Part of the Array Protected

24C01A

24C02

24C04

24C08A

24C16A

At V

CC

Full (1K) Array

Full (2K) Array

Full (4K) Array

Full (8K) Array

Full (16K) Array

At GND

Normal Read/Write Operations