4

ICS9147-01

BUSSTOP# is an asynchronous input to the ICS9147-01. It is used to turn off the BUS (1:6) clocks for low power operation.

BUSSTOP# is synchronized by the ICS9147-01 internally. BUS (1:6) clocks are stopped in a low state and started with

a full high pulse width guaranteed. BUS (1:6) clock on latency cycles are less than 4 CPU clocks and BUS (1:6) clock off

latency is less than 4 clocks.

(Drawing shown on next page.)

Notes:

1. All timing is referenced to the internal CPU clock.

2. CPUSTOP# is an asynchronous input and metastable conditions

may exist. This signal is synchronized to the CPU and SDRAM

clocks inside the ICS9147-01.

3. All other clocks continue to run undisturbed.

4. PD# and BUSSTOP# are shown in a high (true) state.

CPUSTOP# Timing Diagram

CPUSTOP# is an asychronous input to the clock synthesizer. It is used to turn off the CPU clocks for low power operation.

CPUSTOP# is synchronized by the ICS9147-01. All other clocks will continue to run while the CPU and SDRAM clocks

are disabled. The CPU and SDRAM clocks will always be stopped in a low state and start in such a manner that guarantees

the high pulse width is a full pulse. CPU clock on latency is 0 to 1 CPU clocks and CPU clock off latency is 0 to 1 CPU

clocks.

BUSSTOP # Timing Diagram