G1” mounting thread

G1” - G4” pipe size

G1” socket connection

“o” ring seal

“o” ring seal

Adaptor ring

Flow

Direction

Installation information

The flow switch is designed to be used in a horizontal pipe

with the switch mounted through a side entry. Pipe

connection is G1” (1”BSP). The device relies on the flow of

liquid working in opposition to the spring loaded paddle.

The liquid flow moves the paddle within the pipe, when the

flow increases beyond the minimum specified level. A

magnet mounted on the head of the paddle closes a

magnetic switch in the control circuit.

The output switch will open, if the flow drops below the

specified level and the paddle has returned to the rest

position.

The output is a SPNO switch with contacts rated to

1mA/5Vac.

FSHPLC

www.cynergy3.com

© 2012 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.

ISO

Cynergy3 Components Ltd.

7 Cobham Road

Ferndown Industrial Estate

Wimborne, Dorset BH21 7PE

Telephone +44 (0) 1202 897969

Email:sales@cynergy3.com

Flow switch for connection to PLC