UM1811 datasheet(46/52 Pages) STMICROELECTRONICS

Part #	UM1811

Description	G3-PLC graphical user interface

PDF	52 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

46 / 52 page

Basic G3 operations

UM1811

46/52

DocID026814 Rev 1

To configure the PANId, as shown in Figure 34, go into the MAC / MLME_IB (1) menu of the

Node 1, select first the macPANId in the list on the right side of the MLME-SET.Request

command (2). One text box area will appear just below. Enter the PANId of the node (3) and

click on the MLME-SET.Request button (4).

Figure 35. Configure Node 1 PANId

As shown in Figure 35, the same can be done for the macShortAddress parameter. Select

first the attribute macShortAddress in the list of attributes (2) and enter its value in the text

box area (3).

Figure 36. Configure Node 1 short address

The same commands needs to be executed for the Node 2. The PANId may have the same

value as for the Node 1, as represented in Figure 36 (the same PANId means that the two

nodes belong to the same network).

UM1811 Datasheet(PDF) 46 Page - STMicroelectronics