The MSK4301 is a 3 phase MOSFET bridge plus drivers in a convenient isolated hermetic package. The hybrid is capable

of 29 amps of output current and 75 volts of DC bus voltage. It has a full line of protection features, including undervoltage

lockout protection of the bias voltage, cross conduction control and a user programmable dead-time control for shoot-through

elimination. In addition, the bridge may be shut down by using the Enable control. The MSK4301 provides good thermal

conductivity for the MOSFETs due to the electrically isolated package design that allows direct heat sinking of the device

without insulators.

4301

MIL-PRF-38534 AND 38535 CERTIFIED FACILITY

TYPICAL APPLICATIONS

DESCRIPTION:

EQUIVALENT SCHEMATIC

3 Phase Brushless DC

Servo Control

Fin Actuator Control

Gimbal Control

FEATURES:

1

3 Phase AC

Induction Motor Control

HVAC Blower Control

29 AMP, 75V, 3 PHASE MOSFET

BRIDGE WITH INTELLIGENT

INTEGRATED GATE DRIVE

75 Volt Motor Supply Voltage

29 Amp Output Switch Capability, All N-Channel MOSFET Output Bridge

100% Duty Cycle High Side Conduction Capable

Suitable for PWM Applications from DC to 100KHz

Shoot-Through/Cross Conduction Protection

Undervoltage Lockout Protection

Programmable Dead-Time Control

Low Active Enable for Bridge Shutdown Control

Isolated Package Design for High Voltage Isolation Plus Good Thermal Transfer

Available with Three Lead Bend Options

Contact MSK for MIL-PRF-38534 Qualification Status

BH

BL

AL

AH

SWR

VBIAS

EN

CL

CH

GND

AØ

AØ

V+

V+

BØ

BØ

CØ

CØ

RSENSE

RSENSE

1

2

3

4

5

6

7

8

9

10

20

19

18

17

16

15

14

13

12

11

PIN-OUT INFORMATION

8548-71 Rev. J 1/15