Getting started

UM0925

8/22

Doc ID17271 Rev 2

If you have a Development kit, choose one of the following methods.

First method:

Choose a Demo kit (USB or RS232) depending on the connection that you want to

use.

Do not check the option: add Serial EEPROM USB Reader.

Second method:

Plug the USB RF Reader to the PC.

Plug the USB serial EEPROM reader to the PC.

Note:

The serial EEPROM USB reader (I2C connection) is not suitable for use with the data logger

application. Do not connect I2C cable to the data logger.

Once the kit has been selected, the software checks that the selected readers are properly

connected. A progress bar appears during the check as shown in Figure 6.

Figure 6.

Connection check performed by the M24LR64-R datalogger software