| Electronic Components Datasheet Search |
|
LTC1066-1CS Datasheet(PDF) 1 Page - Linear Technology |
|
|
|||||||||||||||||||||||||||||
LTC1066-1CS Datasheet(HTML) 1 Page - Linear Technology |
|
1 / 16 page ![]() 1 LTC1066-1 14-Bit DC Accurate Clock-Tunable, 8th Order Elliptic or Linear Phase Lowpass Filter APPLICATI TYPICAL FREQUENCY (Hz) 100 10k 100k 1M 1066-1 TA02 1k 10 0 –10 –20 –30 –40 –50 –60 –70 –80 –90 fC = 800Hz fC = 80kHz Amplitude Response Clock-Tunable, DC Accurate, 800Hz to 80kHz Elliptic Lowpass Filter 7.5V 1066-1 TA01 –7.5V –7.5V 7.5V VOUT; VOS(OUT) = 2.5mVMAX VIN 40kHz ≤ fCLK ≤ 4MHz 1 µF 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 15pF OUT A –IN A +IN A V– V+ CONNECT 1 FILTEROUT 50/100 CLK V+ OUT B +IN B GND FILTERIN COMP 2 CONNECT 2 COMP 1 V– LTC1066-1 20k 30k SHORT CONNECTION UNDER IC AND SHIELDED BY A GROUND PLANE BYPASS THE POWER SUPPLIES WITH 0.1 µF DISC CERAMIC S FEATURE s DC Gain Linearity: 14 Bits s Maximum DC Offset: ±1.5mV s DC Offset TempCo: 7 µV/°C s Device Fully Tested at fCUTOFF = 80kHz s Maximum Cutoff Frequency: 120kHz (VS = ±8V) s Drives 1k Ω Load with 0.02% THD or Better s Signal-to-Noise Ratio: 90dB s Input Impedance: 500M Ω s Selectable Elliptic or Linear Phase Response s Operates from Single 5V up to ±8V Power Supplies DESCRIPTIO The LTC1066-1 is an 8th order elliptic lowpass filter which simultaneously provides clock-tunability and DC accu- racy. The unique and proprietary architecture of the filter allows 14 bits of DC gain linearity and a maximum of 1.5mV DC offset. An external RC is required for DC accurate operation. With ±7.5V supplies, a 20k resistor and a 1 µF capacitor, the cutoff frequency can be tuned from 800Hz to 100kHz. A clock-tunable 10Hz to 100kHz operation can also be achieved (see Typical Application section). The filter does not require any external active components such as input/output buffers. The input/output impedance is 500M Ω/0.1Ω and the output of the filter can source or sink 40mA. When pin 8 is connected to V +, the clock-to- cutoff frequency ratio is 50:1 and the input signal is sampled twice per clock cycle to lower the risk of aliasing. For frequencies up to 0.75fCUTOFF, the passband ripple is ±0.15dB. The gain at fCUTOFF is –1dB and the filter’s stopband attenuation is 80dB at 2.3fCUTOFF. Linear phase operation is also available with a clock-to-cutoff frequency ratio of 100:1 when pin 8 is connected to ground. The LTC1066-1 is available in an 18-pin SOL package. S APPLICATI s Instrumentation s Data Acquisition Systems s Anti-Aliasing Filters s Smoothing Filters s Audio Signal Processing |
Similar Part No. - LTC1066-1CS |
|
Similar Description - LTC1066-1CS |
|
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |