LTC1314CS datasheet(5/12 Pages) LINER

5 / 12 page

LTC1314/LTC1315

PIN FUNCTIONS

LTC1315

VPPIN (Pins 1, 7): 12V Power Inputs.

SHDN (Pins 2, 8): Shutdown Outputs. When the output is

high, the external 12V regulator can be shut down to

conserve power consumption.

EN0, EN1 (Pins 3, 4, 9, 10): Logic inputs that control the

voltage output on VPPOUT. The input thresholds are

compatible with TTL/CMOS levels. Refer to the Truth

Table.

VCC0 (Pins 5, 11): Logic inputs that control the state of the

MOSFET gate driver DRV3. ESD protection device limits

input excursions to 0.6V below ground.

VCC1 (Pins 6, 12): Logic inputs that control the state of the

MOSFET gate driver DRV5. ESD protection device limits

input excursions to 0.6V below ground.

DRV5, DRV3 (Pins 13, 14, 19, 20): Gate driver outputs

that control the external MOSFETs that switch the VCC pin

of card slot to Hi-Z, 3.3V, or 5V.

VDD (Pins 15, 21): Positive Supplies, 4.5V ≤ VDD ≤ 5.5V.

These pins supply the power to the control logic and the

charge pumps and must be continuously powered.

GND (Pins 16, 22): Ground Connections.

VPPOUT (Pins 17, 23): Switched outputs that provide 0V,

3.3V, 5V, 12V, or Hi-Z to the VPP pin of the card slot. Refer

to the Truth Table.

VCCIN (Pins 18, 24): 5V or 3.3V Power Inputs.

GATE CHARGE

AND DISCHARGE

CONTROL LOGIC

OSCILLATOR

AND BIAS

CHARGE

PUMP

CHARGE

PUMP

BREAK-BEFORE-

MAKE SWITCHES

TTL TO CMOS

CONVERTER

TTL TO CMOS

CONVERTER

GATE CHARGE

AND DISCHARGE

CONTROL LOGIC

GATE CHARGE

CONTROL LOGIC

OSCILLATOR AND

CHARGE PUMP

OUTPUT

SWITCHES

TTL TO CMOS

CONVERTER

TTL TO CMOS

CONVERTER

–

SHDN

VPPIN

VCC0

VCC1

10V

EN1

EN0

VCCIN

VPPOUT

GND

DRV3

DRV5

LTC1314 • BD

GATE CHARGE

AND DISCHARGE

CONTROL LOGIC

BLOCK DIAGRAM

LTC1314 or 1/2 LTC1315

LTC1314CS Datasheet(PDF) 5 Page - Linear Technology

LTC1314CS Datasheet(HTML) 5 Page - Linear Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL