LTC1998CS6 datasheet(6/8 Pages) LINER

Part #	LTC1998CS6

Description	2.5uA, 1% Accurate SOT-23 Comparator and Voltage Reference for Battery Monitoring

PDF	8 Pages

Scroll/Zoom	100%

Manufacturer	LINER [Linear Technology]

Direct Link	http://www.linear.com

Logo

6 / 8 page

LTC1998

1998fa

PIN FUNCTIONS

BATT (Pin 1): Battery Voltage to be monitored. Supply

current is also drawn from this pin. Board layout should

connect this pin to the battery(+) terminal, through a trace

that does not conduct load current.

GND (Pin 2): Ground should be connected to the battery

(–) terminal through a trace that does not conduct load

return current.

VTH.A(Pin3): ThresholdAdjustPin.Adjuststhelowbattery

threshold voltage, VBATT.Th = 2.5V + (VTH.A/2). VTH.A can be

supplied by a voltage source or a resistor divider.

VH.A (Pin 4): Hysteresis Adjust. Hysteresis threshold

voltage VTH2 = 2.5V + (VH.A/2). VH.A can be supplied by

a voltage source or resistor divider. VH.A must always be

programmed to a higher potential than VTH.A. Hysteresis

voltage, VHYST = VTH2 – VBATT.Th.

VLOGIC (Pin 5): Positive Supply Voltage for Output Driver.

This voltage can be driven from an external logic supply

or tied to BATT.

BATTLO (Pin 6): Output of Comparator. Low for BATT

< VBATT.Th (low battery threshold voltage). Output state

guaranteed for VBATT ≥ 1.5V.

LTC1998CS6 Datasheet(PDF) 6 Page - Linear Technology