10 of 25

RFFC5061/62

DS110614

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.

The modulation frequency is calculated according to the following formula:

Programming Information

The RFFC5061 and RFFC5062 share a common serial interface and control block. Please refer to the Register Maps and Pro-

gramming Guide which are available for download from http://rfmd.com/products/IntSynthMixer/.

Evaluation Boards

Evaluation boards for RFFC5061 and RFFC5062 are provided as part of a design kit, along with the necessary cables and pro-

gramming software tool to enable full evaluation of the device. Design kits can be ordered from www.rfmd.com or from local

RFMD sales offices and authorized sales channels. For ordering codes please see “Ordering Information” on page 25.

For further details on how to set up the design kits go to http://rfmd.com/products/IntSynthMixer/.

The standard evaluation boards are configured with 3.7GHz ceramic baluns on the RF ports and wideband transformers on

the IF ports. On the RFFC5061 evaluation board, mixer 1 is configured for down-conversion and mixer 2 is configured for up-

conversion. On the RFFC5062 evaluation board, mixer 2 is configured for down conversion.

2

PD

MODULATION

 2

16





=