AUIPS6044GPbF

www.irf.com

3

Absolute Maximum Ratings

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters

are referenced to Ground lead. Tj= -40°C..150°C, Vcc=6..35V (unless otherwise specified).

Symbol

Parameter

Min.

Max.

Units

Vout

Maximum output voltage

Vcc-35 Vcc+0.3

V

Voffset

Maximum logic ground to load ground offset

Vcc-35 Vcc+0.3

Vin

Maximum input voltage

-0.3

5.5

Vcc max.

Maximum Vcc voltage



36

Vcc cont.

Maximum continuous Vcc voltage



28

Iin max.

Maximum IN current

-3

10

mA

Idg max.

Maximum diagnostic output current

-3

10

Vdg

Maximum diagnostic output voltage

-0.3

5.5

V

Pd

Maximum power dissipation (internally limited by thermal protection)



3.8

W

Rth=130°C/W per channel

Tj max.

Max. storage & operating temperature junction temperature

-40

150

°C

Thermal Characteristics

Symbol

Parameter

Typ.

Max.

Units

Rth1

Thermal resistance junction to ambient

1” sqrt. Footprint / 1 channel On

50



°C/W

Rth2

Thermal resistance junction to ambient

1” sqrt. Footprint / 2 channels On

100



Rth3

Thermal resistance junction to ambient

1” sqrt. Footprint / 4 channels On

130



note : Tj=Power dissipated in one channel x Rth

Recommended Operating Conditions

These values are given for a quick design. For operation outside these conditions, please consult the application notes.

Symbol

Parameter

Min.

Max.

Units

VIH

High level input voltage

4

5.5

VIL

Low level input voltage

0

0.9

Iout

Continuous drain current, Rth=130°C/W, Tj=150°C, 4 channels On

A

Tambient=85°C /

1” sqrt. footprint



1.5

Tambient=105°C /

1” sqrt. footprint



1.2

Rin

Recommended resistor in series with IN pin

4

10

k



Rdgs

Recommended resistor in series with DG pin for reverse battery protection

4

20

Rdgp

Recommended pull-up resistor for DG

4

20

Rol

Recommended pull-up resistor for open load detection

5

100

F max.

Max. switching frequency



3.5

kHz