________________General Description

The MAX4144/MAX4145/MAX4146 differential line

receivers offer unparalleled high-speed, low-distortion

performance. Using a three op-amp instrumentation

amplifier architecture, these ICs have fully symmetrical

differential inputs and a single-ended output. They

operate from ±5V power supplies and are capable of

driving a 150

Ω load to ±3.7V. The MAX4144 has an

internally set closed-loop gain of +2V/V. The MAX4145

is optimized for gains from +1V/V to +10V/V, while the

MAX4146 is optimized for gains from +10V/V to

+100V/V. The MAX4145/MAX4146 require a single

external resistor to set the closed-loop gain.

These amplifiers use laser-trimmed, matched thin-film

resistors to deliver a common-mode rejection (CMR) of

up to 90dB at 10MHz. Using current-feedback tech-

niques, the MAX4144 achieves a 130MHz bandwidth

and a 1000V/µs slew rate. The MAX4145 achieves a

bandwidth of 180MHz and a slew rate of 600V/µs while

operating with a closed-loop gain of +1V/V, and the

MAX4146 features a bandwidth of 70MHz and a slew

rate of 800V/µs with a gain of +10V/V. Excellent differ-

ential gain/phase and noise specifications make these

amplifiers ideal for a wide variety of video and RF

signal-processing applications.

For a complete differential transmission link, use the

MAX4144/MAX4145/MAX4146 with the MAX4147 differ-

ential line driver (see the MAX4147 data sheet for more

information).

________________________Applications

Differential to Single-Ended Conversion

Twisted-Pair to Coaxial Converter

High-Speed Instrumentation Amplifier

Data Acquisition

Medical Instrumentation

High-Speed Differential Line Receiver

____________________________Features

MAX4144:

o +2V/V Internally Fixed Gain

o 130MHz Bandwidth

o 1000V/µs Slew Rate

o 70dB CMR at 10MHz

o -90dBc SFDR (f = 10kHz)

o Low Differential Gain/Phase: 0.03%/0.03°

o 800µA Shutdown

MAX4145:

o External Gain Selection from +1V/V to +10V/V

o 180MHz Bandwidth

o 90MHz 0.1dB Gain Flatness

o 600V/µs Slew Rate

o 75dB CMR at 10MHz

o -92dBc SFDR (f = 10kHz)

o Very Low Noise: 3.8nV/

√Hz (G = +10V/V)

o 800µA Shutdown

MAX4146:

o External Gain Selection from +10V/V to +100V/V

o 800V/µs Slew Rate

o 90dB CMR at 10MHz

o -82dBc SFDR (f = 10kHz)

o Very Low Noise: 3.45nV/

√Hz (G = +100V/V)

o 800µA Shutdown

High-Speed, Low-Distortion,

Differential Line Receivers

________________________________________________________________

Maxim Integrated Products

1

19-1147; Rev 1; 1/98

PART

MAX4144ESD

MAX4146ESD

-40°C to +85°C

-40°C to +85°C

TEMP. RANGE

PIN-PACKAGE

14 SO

14 SO

EVALUATION

KIT

AVAILABLE

_______________Ordering Information

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800

For small orders, phone 408-737-7600 ext. 3468.

Pin Configurations appear at end of data sheet.

Typical Application Circuit appears at end of data sheet.

MAX4145ESD

-40°C to +85°C

14 SO

MAX4144EEE

-40°C to +85°C

16 QSOP

MAX4145EEE

-40°C to +85°C

16 QSOP

MAX4146EEE

-40°C to +85°C

16 QSOP