Fault-Protected, Single 8-to-1/

Dual 4-to-1 Multiplexers

2

_______________________________________________________________________________________

ABSOLUTE MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS—Dual Supplies

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.

(All Voltages Referenced to GND)

V+ ........................................................................-0.3V to +44.0V

V- .........................................................................-44.0V to +0.3V

V+ to V-................................................................-0.3V to +44.0V

COM_, A_, EN (Note 1)........................ (V+ + 0.3V) to (V- - 0.3V)

NO_.........................................................(V+ - 40V) to (V- + 40V)

NO_ to COM_ ..........................................................-36V to +36V

NO_ Voltage with Switch Power On ........................-30V to +30V

NO_ Voltage with Switch Power Off ........................-40V to +40V

Continuous Current into any Terminal. .............................±30mA

Peak Current into any Terminal

(pulsed at 1ms, 10% duty cycle)................................±100mA

16 Narrow SO (derate 8.70mW/°C above +70°C) .......696mW

16 Plastic DIP (derate 10.53mW/°C above +70°C) .....842mW

16 Wide SO (derate 9.52mW/°C above +70°C)...........762mW

Operating Temperature Range

MAX4708E_ E/MAX4709E_E ...........................-40°C to +85°C

Junction Temperature ..................................................... +150°C

Storage Temperature Range .............................-65°C to +160°C

Lead Temperature (soldering, 10s) .................................+300°C

Note 1: COM_, EN, and A_ pins are not fault protected. Signals on COM_, EN, or A_ exceeding V+ or V- are clamped by internal

diodes. Limit forward-diode current to maximum current rating.

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

ANALOG SWITCH

Fault-Free Analog Signal Range

(Notes 3, 4)

E

V-

V+

V

+25°C

300

400

On-Resistance

E

500

Ω

+25°C15

On-Resistance Match

Between Channels

(Note 5)

E20

Ω

+25°C

-0.5

+0.5

NO_ Off-Leakage Current

(Note 6)

E-5

+5

nA

+25°C-2

+2

MAX4708

E

-20

+20

+25°C-1

+1

COM_ Off-Leakage Current

(Note 6)

MAX4709

E

-10

+10

nA

+25°C-2

+2

MAX4708

E

-25

+25

+25°C-1

+1

COM_ On-Leakage Current

floating (Note 6)

MAX4709

E

-15

+15

nA