MIC5204BS datasheet(3/4 Pages) MICREL

3 / 4 page

Note 1.

Exceeding the absolute maximum rating may damage the device.

Note 2.

The device is not guaranteed to function outside its operating rating.

Note 3.

The maximum allowable power dissipation is a function of the maximum junction temperature, T

J(max), the junction-to-ambient thermal

resistance,

JA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using:

(max) = (TJ(max) –TA) θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will

go into thermal shutdown. The

JC of the MIC5204BS is 15°C/W and θJA for the MIC5204BM is 160°C/W mounted on a PC board (see

“Thermal Considerations” for details).

Note 4.

Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range.

Note 5.

Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load

range from 0.1mA to 100mA. Changes in output voltage due to heating effects are covered by the thermal regulation specification.

Note 6.

Dropout Voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V

differential.

Note 7.

Ground pin current is the regulator quiescent current plus pass transistor base current. The total current drawn from the supply is the sum of

the load current plus the ground pin current.

Note 8.

Thermal regulation is defined as the change in output voltage at a time “t” after a change in power dissipation is applied, excluding load or line

regulation effects. Specifications are for a 500mA load pulse at V

IN = 6V for t = 10ms.

Typical Characteristics

-1.0

-0.8

-0.6

-0.4

-0.2

0.0

0.2

0.4

0.6

0.8

1.0

-50 -25

75 100 125

JUNCTION TEMPERATURE (˚C)

Output Voltage Variation

vs. Junction Temperature

3.0

3.5

4.0

4.5

5.0

5.5

6.0

-50 -25

75 100 125

JUNCTION TEMPERATURE (˚C)

Ground Current

vs. Junction Temperature

L = 20Ω

IN = 6V

MIC5204BS Datasheet(PDF) 3 Page - Micrel Semiconductor

MIC5204BS Datasheet(HTML) 3 Page - Micrel Semiconductor

Html Pages

1 2 3 4

Datasheet Download

Link URL