HCS500-P datasheet(16/24 Pages) MICROCHIP

16 / 24 page

HCS500

DS40153B-page 16

Preliminary

6.0

KEY GENERATION

The HCS500 supports three learning schemes which are selected during the initialization of the system EEPROM. The

learning schemes are:

• Normal learn using the KEELOQ decryption algorithm

• Secure learn using the KEELOQ decryption algorithm

• Secure learn using the XOR algorithm

6.1

Normal (Serial Number derived) Learn using the KEELOQ Decryption Algorithm

This learning scheme uses the KEELOQ decryption algorithm and the 28-bit serial number of the transmitter to derive the

encoder key. The 28-bit serial number is patched with predeﬁned values as indicated below to form two 32-bit seeds.

SourceH = 60000000 00000000H + Serial Number | 28 Bits

SourceL = 20000000 00000000H + Serial Number | 28 Bits

Then, using the KEELOQ decryption algorithm and the manufacturer’s code the encoder key is derived as fol-

lows:

KeyH Upper 32 bits = F KEELOQ Decryption (SourceH) | 64-Bit Manufacturer’s Code

KeyL Lower 32 bits = F KEELOQ Decryption (SourceL) | 64-Bit Manufacturer’s Code

6.2

Secure (Seed Derived) Learn using the KEELOQ Decryption Algorithm

This scheme uses the secure seed transmitted by the encoder to derive the two input seeds. The decoder always uses

the lower 64 bits of the transmission to form a 60-bit seed. The upper 4 bits are always forced to zero.

For 32-bit seed encoders (HCS200/HCS300/HCS301):

SourceH = Serial Number Lower 28 bits

SourceL = Seed 32 bits

For 48-bit seed encoders (HCS360/HCS361):

SourceH = Seed Upper 16 bits + Serial Number Upper 16 bits with upper 4 bits set to zero

SourceL = Seed Lower 32 bits

For 60-bit seed encoders (HCS410):

SourceH = Seed Upper 32 bits with upper 4 bits set to zero

SourceL = Seed Lower 32 bits

The KEELOQ decryption algorithm and the manufacturer’s code is used to derive the encoder key as follows:

KeyH Upper 32 bits = F KEELOQ Decrypt (SourceH) | 64 Bit Manufacturer’s Code

KeyL Lower 32 bits = F KEELOQ Decrypt (SourceL) | 64 Bit Manufacturer’s Code

6.3

Secure (Seed Derived) Learn using the XOR Algorithm

This scheme uses the seed transmitted by the encoder to derive the two input seeds. The decoder always use the lower

64 bits of the transmission to form a 60-bit seed. The upper 4 bits are always forced to zero.

For 32-bit seed encoders (HCS200/HCS300/HCS301):

SourceH = Serial Number Lower 28 bits

SourceL = Seed 32 bits

For 48-bit seed encoders (HCS360/HCS361):

SourceH = Seed Upper 16 bits + Serial Number Upper 16 bits with upper 4 bits set to zero

SourceL = Seed Lower 32 bits

For 60-bit seed encoders (HCS410):

SourceH = Seed Upper 32 bits with upper 4 bits set to zero

SourceL = Seed Lower 32 bits

Then, using the KEELOQ decryption algorithm and the manufacturer’s code the encoder key is derived

as follows:

KeyH Upper 32 bits = SourceH XOR 64-Bit Manufacturer’s Code | Upper 32 bits

KeyL Lower 32 bits = SourceL XOR 64-Bit Manufacturer’s Code | Lower 32 bits

HCS500-P Datasheet(PDF) 16 Page - Microchip Technology

HCS500-P Datasheet(HTML) 16 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Datasheet Download

Link URL