SM5007 series

NIPPON PRECISION CIRCUITS—8

FUNCTIONAL DESCRIPTION

Standby Function

The oscillator stops when INH goes LOW. When the oscillator stops, the oscillator output on Q changes as

shown in the following table.

Power-save Pull-up Resistance

The INH pull-up resistance changes in response to the input level (HIGH or LOW). When INH goes LOW

(standby state), the pull-up resistance becomes large to reduce the current consumption during standby.

INH

Q

Oscillator

HIGH (or open)

N o r mal operation

LO W

AA ser ies : L OW

AL series : High impedance

Stopped